RM36D0EC _59 Vehicle Exterior _083096 LIGHTING (EXT) _0402640 SWITCH HOUSING A

LIGHTING (EXT)  SWITCH HOUSING  INSTALLATION  


PROCEDURE

Hide 84319 1.INSTALL STEERING WHEEL SWITCH HOUSING

a.
E404104

If reusing the steering wheel switch housing:

i.

Using pliers, support the band clamp while loosened and set the steering wheel switch housing.


ii.
E404107C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw and install the steering wheel switch housing as shown in the illustration.


iii.
E404106

Tighten the band clamp.



b.

If installing a new steering wheel switch housing:

i.
E404108

Set the steering wheel switch in place.


ii.
E404109C01
0,0 0,0 false
V113147

Install in this Direction


Attach the claw and install the steering wheel switch housing as shown in the illustration.


iii.
E404110C01
0,0 0,0 false
V113147

Remove in this Direction


Remove the pin and tighten the band clamp.



Hide 6. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART