RM36D0EC
_51
Engine / Hybrid System
_083065
M20D-FKS STARTING
_0402943
RELAY
G
M20D-FKS STARTING RELAY INSPECTION
PROCEDURE
28300
1.INSPECT ST NO. 1 RELAY (STARTER RELAY ASSEMBLY)
a.
Check the resistance.
i.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher Battery voltage applied to terminals 1 and 2 Below 1 Ω
If the result is not as specified, replace the ST No. 1 relay.
28300
2.INSPECT ST NO. 2 RELAY (STARTER RELAY ASSEMBLY) (w/o Smart Entry and Start System)
a.
Check the resistance.
i.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher Battery voltage applied to terminals 1 and 2 Below 1 Ω
If the result is not as specified, replace the ST No. 2 relay.