Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.REMOVE ROOF HEADLINING ASSEMBLY
62404
2.REMOVE ROOF SIDE RAIL GARNISH SUB-ASSEMBLY LH
|
Protective Tape |
Put protective tape around the roof side rail garnish sub-assembly LH.
| *a | Double-sided Tape |
Remove the 5 nuts.
Detach the double-sided tape and remove the roof side rail garnish sub-assembly LH.
3.REMOVE NO. 1 ROOF CARRIER SEAL
When removing the No. 1 roof carrier seal, if the double-sided tape is difficult to remove, heat the adhesive of the No. 1 roof carrier seal using a heat light.
| Item | Temperature |
|---|---|
| No. 1 Roof Carrier Seal | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the No. 1 roof carrier seal excessively.
Remove the 2 No. 1 roof carrier seals.
63437A
4.REMOVE NO. 2 ROOF CARRIER SEAL
When removing the No. 2 roof carrier seal, if the double-sided tape is difficult to remove, heat the adhesive of the No. 2 roof carrier seal using a heat light.
| Item | Temperature |
|---|---|
| No. 2 Roof Carrier Seal | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the No. 2 roof carrier seal excessively.
Remove the 2 No. 2 roof carrier seals.
63439B
5.REMOVE NO. 3 ROOF CARRIER SEAL LH
When removing the No. 3 roof carrier seal LH, if the double-sided tape is difficult to remove, heat the adhesive of the No. 3 roof carrier seal LH using a heat light.
| Item | Temperature |
|---|---|
| No. 3 Roof Carrier Seal LH | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the No. 3 roof carrier seal LH excessively.
Remove the No. 3 roof carrier seal LH.
6.REMOVE FRONT ROOF SIDE RAIL PAD LH
When removing the front roof side rail pad LH, if the double-sided tape is difficult to remove, heat the adhesive of the front roof side rail pad LH using a heat light.
| Item | Temperature |
|---|---|
| Front Roof Side Rail Pad LH | 20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the front roof side rail pad LH excessively.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Remove the front roof side rail pad LH as shown in the illustration.