Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
8113A
1.REMOVE HEADLIGHT FRONT TURN SIGNAL LED (for Type A)
Disconnect the connector.
| *a | Matchmark |
| *b | Unlock Position Mark |
|
Turn in this Direction |
Turn the headlight front turn signal LED counterclockwise until the matchmark is aligned with the unlock position mark and remove it.
81510C
2.REMOVE FRONT TURN SIGNAL LIGHT BULB (for Type B)
| *a | Rib |
| *b | Unlock Position |
|
Turn in this Direction |
Turn the headlight cord LH counterclockwise until the matchmark is aligned with the unlock position mark and remove it.
|
Remove in this Direction |
Remove the front turn signal light bulb from the headlight cord LH.
81176
3.REMOVE NO. 1 HEADLIGHT PROTECTOR LH
Remove the No. 1 headlight protector LH.
Do not reuse the No. 1 headlight protector LH.
81165
4.REMOVE HEADLIGHT CORD LH (for Type B)
Disconnect the connector.
Detach the wire harness clamp and remove the headlight cord LH.