EXTERIOR PANELS / TRIM WHEEL OPENING MOULDING(for Rear) REMOVAL

Hide Display 65632B 1.REMOVE REAR WHEEL FRONT HOUSE PLATE LH

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>REAR WHEEL HOUSE PLATE>REMOVAL201910,999999,_59,_083111,_0400772,RM100000001J9NN_01_0001,

Hide Display 75606A 2.REMOVE QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH (except Off Road Package)

a.

0,0 0,0 false

	Screw
	Clip

Remove the screw and 2 clips.

b.

0,0 0,0 false

Protective Tape

Apply protective tape around the quarter outside moulding sub-assembly LH.

c.

0,0 0,0 false

	Place Hand Here
	Push in this Direction
	Remove in this Direction

Place your hand at the location indicated shown in the illustration, pull the quarter outside moulding sub-assembly LH and detach the claw and clip.

NOTICE:: To avoid damaging the claw, do not forcibly pull the quarter outside moulding sub-assembly LH.

d.

2.521,1.229 2.083,0.938 true 2.573,1.167 2.792,1.375 0.219,0.208 10 true *a

*a	Base
	Remove in this Direction

Pull the quarter outside moulding sub-assembly LH outside to disconnect the clip from the base.

e.

Using a clip remover, detach the clip remaining on the vehicle and remove the quarter outside moulding sub-assembly LH.

HINT:: Tape the clip remover tip before use.

f.

0,0 0,0 false

Protective Tape

Using a clip remover, detach the clip remaining on the vehicle and install the quarter outside moulding sub-assembly LH.

HINT:: Tape the clip remover tip before use.

g.

Install the clip which removed to quarter outside moulding sub-assembly LH.

Hide Display 75606A 3.REMOVE QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH (for Off Road Package)

HINT:: When removing the quarter outside moulding sub-assembly LH, if the double-sided tape is difficult to remove, heat the vehicle body and quarter outside moulding sub-assembly LH using a heat light.

Standard:

Item	Temperature
Vehicle Body	20 to 30°C (68 to 86°F)
Quarter Outside Moulding Sub-assembly LH	20 to 30°C (68 to 86°F)

CAUTION:

2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b

*a	Heated Part
*b	Heat Light

·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.

NOTICE:: Do not heat the vehicle body and quarter outside moulding sub-assembly LH excessively.

a.

0,0 0,0 false

	Screw
	Clip

Remove the screw and 2 clips.

b.

0,0 0,0 false

Protective Tape

Apply protective tape around the quarter outside moulding sub-assembly LH.

c.

0,0 0,0 false

	Place Hand Here
	Remove in this Direction

Place your hand at the location indicated shown in the illustration, pull the quarter outside moulding sub-assembly LH and detach the clip and guide.

d.

1.229,0.823 1.229,0.406 1.229,0.406 1.563,0.406 true 1.635,0.313 1.844,0.5 0.208,0.188 10 true *a

*a	Double-sided Tape
	Place Hand Here
	Remove in this Direction

Hold the area shown in the illustration and detach the clip, double-sided tape to remove the quarter outside moulding sub-assembly LH.

e.

1.417,2.167 1.5,2 1.5,2 1.667,2 true 1.75,1.917 1.917,2.083 0.167,0.167 10 true *a

*a	Base
	Remove in this Direction

Pull the quarter outside moulding sub-assembly LH forward to disconnect the clip from the base.

f.

Using a clip remover, detach the clip remaining on the vehicle and install the quarter outside moulding sub-assembly LH.

Hide Display 75874 4.REMOVE QUARTER PANEL WHEEL OPENING MOULDING LH

HINT:: When removing the quarter panel wheel opening moulding LH, if the double-sided tape is difficult to remove, heat the quarter panel wheel opening moulding LH using a heat light.

Standard:

Item	Temperature
Quarter Panel Wheel Opening Moulding LH	20 to 30°C (68 to 86°F)

CAUTION:

2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b

*a	Heated Part
*b	Heat Light

·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.

NOTICE:: Do not heat the quarter panel wheel opening moulding LH excessively.

a.

Remove the clip.

2.573,0.281 2.448,0.094 2.448,0.094 2.229,0.094 true 1.802,0.573 1.677,0.385 1.677,0.385 1.458,0.385 true 6.135,0.281 6.01,0.094 6.01,0.094 5.792,0.094 true 2.26,0.531 2.427,0.531 2.427,0.531 2.427,0.313 true 5.458,0.51 5.333,0.323 5.333,0.323 5.115,0.323 true 5.635,0 5.792,0.198 0.156,0.198 10 true *a 2.052,0.021 2.208,0.219 0.156,0.198 10 true *a 2.094,0.458 2.25,0.656 0.156,0.198 10 true *a 1.313,0.292 1.469,0.49 0.156,0.198 10 true *a 4.948,0.229 5.104,0.427 0.156,0.198 10 true *a 0.229,0.083 0.604,0.323 0.375,0.24 12 false *A 3.844,0.073 4.219,0.313 0.375,0.24 12 false *B

*A	for Type A	*B	for Type B
*a	Double-sided Tape	-	-
	Remove in this Direction	-	-

b.

Detach the clip and double-sided tape and remove the quarter panel wheel opening moulding LH as shown in the illustration.

Hide Display 75895A 5.REMOVE NO. 1 MOULDING TAPE

HINT:: When removing the No. 1 moulding tape, if it is difficult to remove, heat the adhesive of the No. 1 moulding tape using a heat light.

Standard:

Item	Temperature
No. 1 Moulding Tape	20 to 30°C (68 to 86°F)

CAUTION:

2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b

*a	Heated Part
*b	Heat Light

·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.

NOTICE:: Do not heat No. 1 moulding tape excessively.

a.

Remove the No. 1 moulding tape.

Hide Display 75897A 6.REMOVE NO. 2 MOULDING TAPE (for Type A)

HINT:: When removing the No. 2 moulding tape, if it is difficult to remove, heat the adhesive of the No. 2 moulding tape using a heat light.

Standard:

Item	Temperature
No. 2 Moulding Tape	20 to 30°C (68 to 86°F)

CAUTION:

2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b

*a	Heated Part
*b	Heat Light

·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.

NOTICE:: Do not heat No. 2 moulding tape excessively.

a.

Remove the No. 2 moulding tape.

Hide Display 75897A 7.REMOVE NO. 3 MOULDING TAPE

HINT:: When removing the No. 3 moulding tape, if it is difficult to remove, heat the adhesive of the No. 3 moulding tape using a heat light.

Standard:

Item	Temperature
No. 3 Moulding Tape	40 to 60°C (104 to 140°F)

CAUTION:

2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b

*a	Heated Part
*b	Heat Light

·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.

NOTICE:: Do not heat No. 3 moulding tape excessively.

a.

Remove the No. 3 moulding tape.

0.052,0.052 0.427,0.292 0.375,0.24 12 false *A 3.906,0.042 4.281,0.281 0.375,0.24 12 false *B

*A

for Type A

*B

for Type B

EXTERIOR PANELS / TRIM WHEEL OPENING MOULDING(for Rear) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE