RM36D0EC _59 Vehicle Exterior _083111 EXTERIOR PANELS / TRIM _0400766 WHEEL OPENING MOULDING(for Front) A

EXTERIOR PANELS / TRIM WHEEL OPENING MOULDING(for Front) DISASSEMBLY

CAUTION / NOTICE / HINT

HINT:: ·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

Hide Display 53853B 1.REMOVE FRONT NO. 1 WHEEL OPENING EXTENSION PAD (except Off Road Package)

HINT:: When removing the front No. 1 wheel opening extension pad, if it is difficult to remove, heat the adhesive of the front No. 1 wheel opening extension pad and front fender moulding sub-assembly LH using a heat light.

Standard:

Item	Temperature
Front Fender Moulding Sub-assembly LH	40 to 60°C (104 to 140°F)
Front No. 1 Wheel Opening Extension Pad	40 to 60°C (104 to 140°F)

CAUTION:

2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b

*a	Heated Part
*b	Heat Light

Do not touch the heat light and heated parts.

Touching the heat light may result in burns.

Touching heated parts for a long time may result in burns.

NOTICE:: Do not heat front fender moulding sub-assembly LH and front No. 1 wheel opening extension pad excessively.

Remove the front No. 1 wheel opening extension pad.

Hide Display 75692A 2.REMOVE FRONT FENDER OUTSIDE MOULDING PAD LH (except Off Road Package)

HINT:: When removing the rear door rear outside moulding pad, if it is difficult to remove, heat the adhesive of the front fender outside moulding pad LH and front fender moulding sub-assembly LH using a heat light.

Standard:

Item	Temperature
Front Fender Moulding Sub-assembly LH	40 to 60°C (104 to 140°F)
Front Fender Outside Moulding Pad LH	40 to 60°C (104 to 140°F)

CAUTION:

2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b

*a	Heated Part
*b	Heat Light

Do not touch the heat light and heated parts.

Touching the heat light may result in burns.

Touching heated parts for a long time may result in burns.

NOTICE:: Do not heat front fender moulding sub-assembly LH and front fender outside moulding pad LH excessively.

Remove the front fender outside moulding pad LH.

Hide Display 53855C 3.REMOVE FRONT NO. 5 WHEEL OPENING EXTENSION PAD (for Off Road Package)

HINT:: When removing the front No. 5 wheel opening extension pad, if it is difficult to remove, heat the adhesive of the front No. 5 wheel opening extension pad and front fender moulding sub-assembly LH using a heat light.

Standard:

Item	Temperature
Front Fender Moulding Sub-assembly LH	40 to 60°C (104 to 140°F)
Front No. 5 Wheel Opening Extension Pad	40 to 60°C (104 to 140°F)

CAUTION:

2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b

*a	Heated Part
*b	Heat Light

Do not touch the heat light and heated parts.

Touching the heat light may result in burns.

Touching heated parts for a long time may result in burns.

NOTICE:: Do not heat the front fender moulding sub-assembly LH and front No. 5 wheel opening extension pad excessively.

Remove the front No. 5 wheel opening extension pad.