EXTERIOR PANELS / TRIM  FRONT BUMPER(for Type A)  DISASSEMBLY  

1.REMOVE FOG LIGHT SEAL (w/o TOYOTA Parking Assist-sensor System)

HINT:

Using the same procedure, remove every fog light seal.

a.

Remove the fog light seal.

82114 2.REMOVE NO. 4 ENGINE ROOM WIRE

a.

Disconnect each connector.

4.917,1.385 5.25,1.385 true 1.427,0.99 1.708,1.26 true 5.885,0.99 5.896,1.438 true 1.177,1.979 1.417,2.208 0.24,0.229 12 true *A 3.479,1.656 3.719,1.885 0.24,0.229 12 true *B 4.969,1.823 5.208,2.052 0.24,0.229 12 true *A 1.979,1.854 2.219,2.083 0.24,0.229 12 true *A 5.75,2 5.99,2.229 0.24,0.229 12 true *A 3.823,1 4.063,1.229 0.24,0.229 12 true *C 1.198,0.771 1.438,1 0.24,0.229 12 true *A 5.76,0.771 6,1 0.24,0.229 12 true *A

*A	w/ TOYOTA Parking Assist-sensor System	*B	w/ Panoramic View Monitor System
*C	w/ Dynamic Radar Cruise Control System	-	-

b.

Detach the clamp and remove the No. 4 engine room wire.

89341K 3.REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

89341L 4.REMOVE FRONT CENTER ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

86790B 5.REMOVE FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)

88211B 6.REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

7.REMOVE NUT (w/ Dynamic Radar Cruise Control System)

a.

0,0 0,0 false

Remove in this Direction

Remove the 2 nuts as shown in the illustration.

81220 8.REMOVE FOG LIGHT ASSEMBLY LH

81210A 9.REMOVE FOG LIGHT ASSEMBLY RH

53395E 10.REMOVE FRONT HOOD TO END PANEL SEAL

a.

0,0 0,0 false

Remove in this Direction

Detach the clip and remove the front hood to end panel seal as shown in the illustration.

53115B 11.REMOVE RADIATOR GRILLE BRACKET

a.

0,0 0,0 false

	Screw
	Clip (A)
	Clip (B)

Remove the 2 screws.

b.

Remove the 4 clips (A).

c.

Remove the 2 clips (B) and detach the guide.

d.

0,0 0,0 false

Remove in this Direction

Remove the 8 screws.

e.

Detach the claw and remove the radiator grille bracket as shown in the illustration.

53124B 12.REMOVE SIDE RADIATOR GRILLE MOULDING LH

a.

0,0 0,0 false

Remove in this Direction

Detach the claw and remove the side radiator grille moulding LH as shown in the illustration.

53123B 13.REMOVE SIDE RADIATOR GRILLE MOULDING RH

52128B 14.REMOVE FRONT BUMPER HOLE COVER LH

a.

0,0 0,0 false

Remove in this Direction

Remove the clip.

b.

Detach the claw and remove the front bumper hole cover LH.

52127D 15.REMOVE FRONT BUMPER HOLE COVER RH

75311 16.REMOVE RADIATOR GRILLE EMBLEM (w/ Dynamic Radar Cruise Control System)

a.

0,0 0,0 false

Remove in this Direction

Remove the screw.

b.

Detach the claw and guide and remove the radiator grille emblem as shown in the illustration.

17.REMOVE RADIATOR GRILLE EMBLEM SUB-ASSEMBLY (w/o Dynamic Radar Cruise Control System)

18.REMOVE FRONT BUMPER ARM HOLE COVER LH

a.

0,0 0,0 false

Remove in this Direction

Detach the claw as shown in the illustration.

b.

0,0 0,0 false

Fall Prevention Hook

Disconnect the fall prevention hook and remove the front bumper arm hole cover LH.

19.REMOVE FRONT BUMPER ARM HOLE COVER RH

52438 20.REMOVE FRONT BUMPER GUARD COVER LH

a.

0,0 0,0 false

Remove in this Direction

Detach the claw as shown in the illustration.

b.

0,0 0,0 false

Fall Prevention Hook

Disconnect the fall prevention hook and remove the front bumper guard cover LH.

52437 21.REMOVE FRONT BUMPER GUARD COVER RH

52411 22.REMOVE FRONT BUMPER GUARD

a.

Remove the 6 outside moulding retainers.

b.

Remove the 2 screws.

c.

Detach the claw and guide to remove the front bumper guard as shown in the illustration.

0,0 0,0 false

Remove in this Direction

-

-

52711 23.REMOVE FRONT BUMPER MOULDING (for Separate Type)

a.

Remove the 2 screws.

b.

0,0 0,0 false

Remove in this Direction

Detach the claw and remove the front bumper moulding as shown in the illustration.

53113E 24.REMOVE LOWER NO. 2 RADIATOR GRILLE

a.

Remove the 2 screws.

b.

0,0 0,0 false

Remove in this Direction

Detach the claw and remove the lower No. 2 radiator grille as shown in the illustration.

53112E 25.REMOVE LOWER NO. 1 RADIATOR GRILLE

a.

0,0 0,0 false

Remove in this Direction

Detach the claw and guide to remove the lower No. 1 radiator grille as shown in the illustration.

52536 26.REMOVE FRONT BUMPER SIDE RETAINER LH

a.

0,0 0,0 false

	Remove in this Direction
	Bolt
	Screw

Remove the bolt.

b.

Remove the screw.

c.

Detach the claw and remove the front bumper side retainer LH as shown in the illustration.

52535 27.REMOVE FRONT BUMPER SIDE RETAINER RH

52614 28.REMOVE FRONT BUMPER NO. 2 ENERGY ABSORBER

a.

0,0 0,0 false

Remove in this Direction

Detach the guide and remove the front bumper No. 2 energy absorber.

52021 29.REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

a.

Detach the wire harness clamp.

b.

Remove the 6 bolts and front bumper reinforcement sub-assembly as shown in the illustration.

52132A 30.REMOVE FRONT BUMPER NO. 2 REINFORCEMENT (for HV Model)

a.

Remove the 4 nuts and front bumper No. 2 reinforcement.

51441 31.REMOVE NO. 1 ENGINE UNDER COVER

a.

Remove the 2 screws and 2 bolts.

0,0 0,0 false

Bolt

Screw

b.

0,0 0,0 false

Remove in this Direction

Detach the guide and remove the No. 1 engine under cover.

52618 32.REMOVE FRONT BUMPER LOWER ABSORBER (for Gasoline Model)

a.

Remove the 5 bolts.

b.

0,0 0,0 false

Remove in this Direction

Detach the guide and remove the front bumper lower absorber as shown in the illustration.

52618 33.REMOVE FRONT BUMPER LOWER ABSORBER (for HV Model)

a.

Remove the clip.

b.

0,0 0,0 false

Remove in this Direction

Detach the claw and remove the front bumper lower absorber.

52103C 34.REMOVE FRONT BUMPER EXTENSION SUB-ASSEMBLY LH

a.

0,0 0,0 false

	Bolt
	Nut

Remove the 2 nuts and 2 bolts and front bumper extension sub-assembly LH.

52102F 35.REMOVE FRONT BUMPER EXTENSION SUB-ASSEMBLY RH