THEFT DETERRENT / KEYLESS ENTRY ELECTRICAL KEY OSCILLATOR(for Rear Floor) INSTALLATION
PROCEDURE
899A0
1.INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (for HV Model)
Attach the clamp to install the No. 1 indoor electrical key antenna assembly.
- NOTICE:
-
Do not reuse parts if dropped or subjected to any strong impact.
Connect the connector.
899A0A
2.INSTALL NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (for Gasoline Model)
Attach the clamp to install the No. 2 indoor electrical key antenna assembly.
- NOTICE:
-
Do not reuse parts if dropped or subjected to any strong impact.
Connect the connector.
71033
3.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY (for HV Model)
58464D
4.INSTALL BATTERY SERVICE COVER BOARD (for HV Model)
58467H
5.INSTALL NO. 3 BATTERY SERVICE COVER BOARD (for HV Model)
58466J
6.INSTALL NO. 2 BATTERY SERVICE COVER BOARD (for HV Model)
67918E
7.INSTALL REAR DOOR SCUFF PLATE LH (for HV Model)
67917C
8.INSTALL REAR DOOR SCUFF PLATE RH (for HV Model)
- HINT:
-
Use the same procedure described for the LH side.
72693
9.INSTALL REAR SEAT CUSHION LOCK HOOK
10.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY