RM36D0EC _V1 General _083136 MAINTENANCE _0403537 REAR TURN SIGNAL LIGHT BULB A

MAINTENANCE  REAR TURN SIGNAL LIGHT BULB  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81550L 1.INSTALL REAR TURN SIGNAL LIGHT BULB

a.
E402981
0,0 0,0 false
V113147

Install in this Direction


Install the rear turn signal light bulb to the bulb socket.


b.

for Type A:

i.
B555554
0.885,1.375 0.688,1.229 true 1.948,1.198 2.135,1.042 true 0.417,1.313 0.646,1.313 true 0.885,1.365 1.083,1.542 0.198,0.177 10 true *a 1.781,1.156 1.979,1.333 0.198,0.177 10 true *c 0.24,1.229 0.438,1.406 0.198,0.177 10 true *b
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Turn in this Direction


Align the matchmark of the bulb socket with the unlock position mark, and then turn the bulb socket clockwise until the lock position mark and connect the bulb socket.


ii.

Attach the pin and guide as shown in the illustration.


iii.
B555541C02
1.219,0.792 1.406,0.969 0.188,0.177 10 true *a 0.74,1.396 0.938,1.573 0.198,0.177 10 true *b 1.729,1.573 1.927,1.75 0.198,0.177 10 true *b 2.031,1.563 2.229,1.74 0.198,0.177 10 true *b
*a Pin
*b Guide
V113147

Install in this Direction


Align the guide and pin and set the rear combination light assembly LH.


iv.

Attach the pin and guide as shown in the illustration.


v.
B555539C01
0,0 0,0 false
V100155

Protective Tape


Install the rear combination light assembly LH with the 2 screws.



c.

for Type B:

i.
B573060
0.927,1.385 0.729,1.24 true 1.865,1.229 2.052,1.073 true 0.417,1.313 0.646,1.313 true 0.969,1.344 1.167,1.521 0.198,0.177 10 true *a 1.781,1.177 1.979,1.354 0.198,0.177 10 true *c 0.24,1.229 0.438,1.406 0.198,0.177 10 true *b
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark
V113147

Turn in this Direction


Align the matchmark of the bulb socket with the unlock position mark, and then turn the bulb socket clockwise until the lock position mark and connect the bulb socket.


ii.
B573030C01
1.219,0.948 1.406,1.125 0.188,0.177 10 true *a 0.76,1.583 0.958,1.76 0.198,0.177 10 true *b 1.875,1.792 2.073,1.969 0.198,0.177 10 true *b 2.177,1.781 2.375,1.958 0.198,0.177 10 true *b
*a Pin
*b Guide
V113147

Install in this Direction


Align the guide and pin and set the rear combination light assembly LH.


iii.

Attach the pin and guide as shown in the illustration.


iv.
B573027C01
0,0 0,0 false
V100155

Protective Tape


Install the rear combination light assembly LH with the 2 screws.