CUSTOMIZE HEADUP DISPLAY SYSTEM
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Customize Setting / Display.
Select the setting by referring to the table below.
Be sure to record the current value before customizing.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Projection Adjustment (Tilt) | Headup display image calibration (Tilt calibration) | Default | $03:Clockwise (+3),$02:Clockwise (+2),$01:Clockwise (+1),$00:Default,$FF:Anti-Clockwise (-1),$FE:Anti-Clockwise (-2),$FD:Anti-Clockwise (-3) | Meter mirror sub-assembly |
| Projection Adjustment (Keystone) | Headup display image calibration (keystone calibration) | Default | $03:Narrow Top (+3),$02:Narrow Top (+2),$01:Narrow Top (+1),$00:Default,$FF:Narrow Bottom (-1),$FE:Narrow Bottom (-2),$FD:Narrow Bottom (-3) | Meter mirror sub-assembly |
| Projection Adjustment (Distortion) | Headup display image calibration (distortion calibration) | Default | $03:Convex (+3),$02:Convex (+2),$01:Convex (+1),$00:Default,$FF:Concave (-1),$FE:Concave (-2),$FD:Concave (-3) | Meter mirror sub-assembly |
| Audio Information Display Function | Audio information display setting for headup display | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
| Master Caution Display Function | Master caution display setting for headup display | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
| Turn by Turn Animation Function | Cannot be used | Cannot be used | $00:OFF,$01:ON | - |
| ECO Drive Indicator Zone Display Function | ECO drive indicator setting for headup display | ON | $00:OFF,$01:ON | Meter mirror sub-assembly |
Customizing with the combination meter
Turn the engine switch on (IG).
Select the setting tab and perform the customize setting from the combination meter screen.
| Combination Meter Assembly Display | Detail | Description | Default | Setting | ECU |
|---|---|---|---|---|---|
| HUD Brightness / Position | Brightness | Display brightness setting for headup display. | Illumination adjustment bar: Has 11 steps. Default is 7th from low side. | Adjust the setting using the arrow keys on the steering pad switch according to the explanation displayed on the combination meter | Meter mirror sub-assembly |
| Position | Display position setting for headup display | - | Adjust the setting using the arrow keys on the steering pad switch according to the explanation displayed on the combination meter | Meter mirror sub-assembly | |
| HUD Driving Support | Tachometer Settings | Tachometer display setting for headup display | Tachometer | Tachometer/ECO Indicator/Blank Screen | Meter mirror sub-assembly |
| Navigation | Turn-by-turn (navigation) display setting for headup display | On | On/Off | Meter mirror sub-assembly | |
| Driving Assist | Driving assist display setting for headup display | On | On/Off | Meter mirror sub-assembly | |
| Compass | Compass display setting for headup display | On | On/Off | Meter mirror sub-assembly | |
| Audio | Audio information display setting for headup display | On | On/Off | Meter mirror sub-assembly | |
| HUD Rotation | - | Headup display image calibration (rotation calibration) | - | Adjust the setting using the arrow keys on the steering pad switch according to the explanation displayed on the combination meter | Meter mirror sub-assembly |