RM36D0EC _58 Vehicle Interior _083102 SEAT _0419060 REAR SEAT ASSEMBLY(for GTMC Made) A

SEAT REAR SEAT ASSEMBLY(for GTMC Made) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:: ·

Wear protective gloves. Sharp areas on the parts may injure your hands.

·

There is risk of injury.

PROCEDURE

Hide Display 72602A 1.INSTALL REAR SEATBACK LOCK STRIKER SUB-ASSEMBLY LH

0.688,1.719 0.906,1.938 0.219,0.219 10 true (1) 0.406,0.229 0.625,0.448 0.219,0.219 10 true A 1.76,1.573 1.979,1.792 0.219,0.219 10 true (3) 0.635,0.229 0.854,0.448 0.219,0.219 10 true (2)

Temporarily install the rear seatback lock striker sub-asembly LH with the bolt A.

Tighten the 3 bolts in the order shown in the illustration.

Torque:: 18.1 N*m (185 kgf*cm, 13 ft.*lbf)

Hide Display 72601A 2.INSTALL REAR SEATBACK LOCK STRIKER SUB-ASSEMBLY RH

HINT:: Use the same procedure described for the LH side.

Hide Display 64740E 3.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202004,202304,_58,_083106,_0400609,RM100000001MYUI_01_0057,202304,999999,_58,_083106,_0400609,RM1000000029RSX_01_0057,

Hide Display 64730J 4.INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202004,202304,_58,_083106,_0400609,RM100000001MYUI_01_0012,202304,999999,_58,_083106,_0400609,RM1000000029RSX_01_0012,

Hide Display 58460D 5.INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202004,202304,_58,_083106,_0400609,RM100000001MYUI_01_0018,202304,999999,_58,_083106,_0400609,RM1000000029RSX_01_0018,

Hide Display 73708A 6.INSTALL TETHER ANCHOR BRACKET SET

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202004,202304,_58,_083106,_0400609,RM100000001MYUI_01_0019,202304,999999,_58,_083106,_0400609,RM1000000029RSX_01_0019,

Hide Display 62552F 7.INSTALL REAR SEAT SIDE GARNISH LH

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202004,202304,_58,_083106,_0400609,RM100000001MYUI_01_0021,202304,999999,_58,_083106,_0400609,RM1000000029RSX_01_0021,

Hide Display 62551F 8.INSTALL REAR SEAT SIDE GARNISH RH

HINT:: Use the same procedure described for the LH side.

Hide Display 62332C 9.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR OPENING TRIM WEATHERSTRIP>INSTALLATION201910,999999,_59,_083093,_0403690,RM100000001JUGI_02_0001,

Hide Display 62331C 10.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:: Use the same procedure described for the LH side.

Hide Display 58577E 11.INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202004,202304,_58,_083106,_0400609,RM100000001MYUI_01_0036,202304,999999,_58,_083106,_0400609,RM1000000029RSX_01_0036,

Hide Display 71033 12.INSTALL REAR SEAT CUSHION LEG SUB-ASSEMBLY (for HV Model)

2.177,1.833 2.396,2.063 0.219,0.229 10 true (1) 2.688,0.167 2.906,0.396 0.219,0.229 10 true (3) 1.115,1.833 1.333,2.063 0.219,0.229 10 true (1) 2.646,1.844 2.865,2.073 0.219,0.229 10 true (2) 0.646,1.844 0.865,2.073 0.219,0.229 10 true (2) 0.552,0.167 0.771,0.396 0.219,0.229 10 true (3)

Install in this Direction

Attach the guide.

Temporarily install the rear seat cushion leg sub-assembly with the 6 bolts.

Tighten the 6 bolts in the order shown in the illustration.

Torque:: 19.5 N*m (199 kgf*cm, 14 ft.*lbf)

Hide Display 58464D 13.INSTALL BATTERY SERVICE COVER BOARD (for HV Model)

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>BATTERY BLOWER>INSTALLATION202004,999999,_51,_083048,_0400707,RM100000001MYUS_02_0123,

Hide Display 58467H 14.INSTALL NO. 3 BATTERY SERVICE COVER BOARD (for HV Model)

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>BATTERY BLOWER>INSTALLATION202004,999999,_51,_083048,_0400707,RM100000001MYUS_02_0126,

Hide Display 58466J 15.INSTALL NO. 2 BATTERY SERVICE COVER BOARD (for HV Model)

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>BATTERY BLOWER>INSTALLATION202004,999999,_51,_083048,_0400707,RM100000001MYUS_02_0124,

Hide Display 67918E 16.INSTALL REAR DOOR SCUFF PLATE LH

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202004,202304,_58,_083106,_0400609,RM100000001MYUI_01_0033,202304,999999,_58,_083106,_0400609,RM1000000029RSX_01_0033,

Hide Display 67917C 17.INSTALL REAR DOOR SCUFF PLATE RH

HINT:: Use the same procedure as for the LH side.

Hide Display 71304C 18.INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH

1.219,1.698 1.406,1.896 0.188,0.198 10 true (2) 1.771,1.781 1.969,1.979 0.198,0.198 10 true (1)

Temporarily install the rear seatback hinge sub-assembly LH with the 2 bolts.

Tighten the 2 bolts in the order shown in the illustration.

Torque:: 36.8 N*m (375 kgf*cm, 27 ft.*lbf)

Hide Display 71303C 19.INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY RH

HINT:: Use the same procedure as for the LH side.

Hide Display 71305A 20.INSTALL REAR CENTER SEATBACK HINGE SUB-ASSEMBLY

1.917,1.927 2.104,2.125 0.188,0.198 10 true (1) 0.958,1.781 1.146,1.979 0.188,0.198 10 true (2)

Temporarily install the rear center seatback hinge sub-assembly with the 2 bolts.

Tighten the 2 bolts in the order shown in the illustration.

Torque:: 36.8 N*m (375 kgf*cm, 27 ft.*lbf)

Hide Display 21.INSTALL REAR SEATBACK ASSEMBLY RH

Attach the guide.

NOTICE:: Be careful not to damage the rear seatback assembly RH, body exterior or interior parts.

2.896,0.698 3.135,0.906 0.24,0.208 10 true (1) 2.052,0.01 2.292,0.219 0.24,0.208 10 true (2)

Install the rear seatback assembly RH with the 2 bolts in the order shown in the illustration.

Torque:: 36.8 N*m (375 kgf*cm, 27 ft.*lbf)

0,0 0,0 false

Fastening tape

Attach the fastening tape.

Attach the clip.

Return the rear seatback assembly RH.

Hide Display 73350C 22.INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY (FLOOR ANCHOR)

Click hereVehicle Interior>SEAT BELT>REAR CENTER SEAT OUTER BELT ASSEMBLY (for GTMC Made)>INSTALLATION202004,999999,_58,_083103,_0419080,RM100000001MO7U_01_0083,

Hide Display 23.INSTALL REAR SEATBACK ASSEMBLY LH

Attach the guide.

NOTICE:: Be careful not to damage the rear seatback assembly LH, body exterior or interior parts.

2.552,0.052 2.792,0.26 0.24,0.208 10 true (1) 3.01,0.667 3.25,0.875 0.24,0.208 10 true (2)

Install the rear seatback assembly LH with the 2 bolts in the order shown in the illustration.

Torque:: 36.8 N*m (375 kgf*cm, 27 ft.*lbf)

0,0 0,0 false

Fastening tape

Attach the fastening tape.

Attach the clip.

Return the rear seatback assembly LH.

Hide Display 72693 24.INSTALL REAR SEAT CUSHION LOCK HOOK

HINT:: Use the same procedure for the 2 parts.

Set a new rear seat cushion lock hook.

1.042,2.823 1.271,3.01 1.271,3.01 1.479,3.01 true 1.521,2.938 1.833,3.135 0.313,0.198 10 false *a

*a	Sleeve
	Protective Tape

Using 2 thin-bladed screwdrivers, push the sleeve to attach the claw.

NOTICE:: Do not apply excessive force which may break the sleeve.

HINT:: Tape the thin-bladed screwdriver tip before use.

Check the installation condition.

OK:: The sleeve is installed properly.

0.521,1.375 0.896,1.375 false 1.625,1.458 1.646,1.792 1.646,1.792 1.833,1.792 false 1.073,1.781 0.604,1.781 true 1.146,0.552 1.458,0.75 0.313,0.198 10 false *d 2.719,0.573 3.031,0.771 0.313,0.198 10 false *e 4.25,0.573 4.563,0.771 0.313,0.198 10 false *e 5.844,0.583 6.156,0.781 0.313,0.198 10 false *e 0.333,1.281 0.646,1.479 0.313,0.198 10 false *a 1.906,1.729 2.219,1.927 0.313,0.198 10 false *b 0.417,1.708 0.729,1.906 0.313,0.198 10 false *c

*a	Body	*b	Vehicle
*c	Sleeve	*d	Correct
*e	Incorrect	-	-

Hide Display 25.INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

Place the bench type rear seat cushion assembly in the vehicle.

NOTICE:: Be careful not to damage the bench type rear seat cushion assembly, body exterior or interior parts.

1.344,0.5 1.969,0.5 true 2,0.406 2.313,0.563 0.313,0.156 10 false *a

*a	Child Restraint Seat Anchor Bracket Sub-assembly
	Install in this Direction

Attach the hook on the rear end of bench type rear seat cushion assembly under the 2 child restraint seat anchor bracket sub-assemblies.

0,0 0,0 false

Install in this Direction

Push in the installation direction shown in the illustration and attach the hook on the front of bench type rear seat cushion assembly to the rear seat cushion lock hook.

NOTICE:: ·

Be sure to attach the hook on the front of bench type rear seat cushion assembly one at a time.

·

Check that the rear seat cushion lock hook and bench type rear seat cushion assembly are securely fastened.

Hide Display 71960B 26.INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

Install the rear center seat headrest assembly.

Hide Display 71940A 27.INSTALL REAR SEAT HEADREST ASSEMBLY

Install the 2 rear seat headrest assemblies.

Hide Display 58386 28.INSTALL REAR FLOOR FINISH PLATE

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202004,202304,_58,_083106,_0400609,RM100000001MYUI_01_0037,202304,999999,_58,_083106,_0400609,RM1000000029RSX_01_0037,

Hide Display 58417H 29.INSTALL REAR NO. 3 FLOOR BOARD

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202004,202304,_58,_083106,_0400609,RM100000001MYUI_01_0042,202304,999999,_58,_083106,_0400609,RM1000000029RSX_01_0042,

Hide Display 58416K 30.INSTALL REAR NO. 2 FLOOR BOARD

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202004,202304,_58,_083106,_0400609,RM100000001MYUI_01_0040,202304,999999,_58,_083106,_0400609,RM1000000029RSX_01_0040,

Hide Display 58410B 31.INSTALL DECK BOARD ASSEMBLY

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION202004,202304,_58,_083106,_0400609,RM100000001MYUI_01_0043,202304,999999,_58,_083106,_0400609,RM1000000029RSX_01_0043,