Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
67874C
1.REMOVE REAR DOOR NO. 5 WEATHERSTRIP LH
75078
2.REMOVE REAR DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY LH (for Type A)
Remove the clip.
|
Protective Tape |
Apply protective tape around the rear door lower outside moulding sub-assembly LH.
Remove the hole plug.
Remove the nut.
|
Place Hand Here |
|
Remove in this Direction |
Detach the clip and remove the rear door lower outside moulding sub-assembly LH as shown in the illustration.
75078
3.REMOVE REAR DOOR LOWER OUTSIDE MOULDING SUB-ASSEMBLY LH (for Type B)
Remove the clip.
|
Protective Tape |
Apply protective tape around the rear door lower outside moulding sub-assembly LH.
Remove the hole plug.
Remove the nut.
|
Place Hand Here |
|
Remove in this Direction |
Detach the clip and remove the rear door lower outside moulding sub-assembly LH as shown in the illustration.
75062
4.REMOVE OUTSIDE MOULDING SET LH
|
Screw |
|
Clip |
Remove the screw and clip.
|
Protective Tape |
Apply protective tape around the outside moulding set LH.
|
Place Hand Here |
|
Remove in this Direction |
Detach the clip and claw and remove the outside moulding set LH as shown in the illustration.
67888J
5.REMOVE NO. 2 ACCESS PANEL WEATHERSTRIP LH
Detach the clip and remove the No. 2 access panel weatherstrip LH.
67858B
6.REMOVE REAR DOOR PANEL PROTECTOR LH
|
Screw |
|
Clip |
Remove the screw and clip.
|
Protective Tape |
Apply protective tape around the rear door panel protector LH.
|
Remove in this Direction |
Detach the claw and guide to remove the rear door panel protector LH as shown in the illustration.