CUSTOMIZE LANE TRACING ASSIST SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
The following items can be customized.
Customizing with the multi-information display
Turn the ignition switch to ON.
Select the setting by referring to the table below.
Change the settings of the LTA using the steering pad switch assembly.
Each item is displayed on the "Setting" tab on the multi-information display.
| Display | Content | Setting | Default |
|---|---|---|---|
| Lane Center | Lane centering function | On/Off | On |
| Steering Assist | Lane departure alert steering control function | On/Off | On |
| Sensitivity | Timing of lane departure alert | High/Standard | High |
| Sway Warning | Sway warning function | On/Off | On |
| Sway Sensitivity | Sway warning sensitivity | High/Standard/Low | Standard |
Some of lane control functions are available only when other functions are operating or available. Refer to the following table.
| Vehicle-to-vehicle distance control (with full-speed range following function) | LTA Main Switch | Customize Setting | |||
|---|---|---|---|---|---|
| Steering Assist | Lane Center | Sway Warning | |||
| Lane Departure Alert Function | - | ○ | - | - | - |
| Lane Departure Alert Steering Control Function | - | ○ | ○ | - | - |
| Lane Centering Function | ● | ○ | ○ | ○ | - |
| Vehicle Sway Warning Function | - | - | - | - | ○ |
●: System/function operating
○: System/function available