RM36D0EC _59 Vehicle Exterior _083093 DOOR / HATCH _0403703 FUEL LID OPENER SWITCH G

DOOR / HATCH  FUEL LID OPENER SWITCH  INSPECTION  


PROCEDURE

Hide 84841A 1.INSPECT FUEL LID OPENER SWITCH

a.
B472417C04
1.115,1.833 1.302,1.438 true 1.969,1.833 1.969,1.438 true 1.479,1.833 1.479,1.438 true 2.365,1.823 2.156,1.417 true 0.146,0.146 0.479,0.396 0.333,0.25 10 false *a 1,1.865 1.333,2.115 0.333,0.25 10 false ILL+ 1.948,1.865 2.281,2.115 0.333,0.25 10 false E 1.438,1.865 1.771,2.115 0.333,0.25 10 false IG 2.292,1.854 2.625,2.104 0.333,0.25 10 false ILL-
*a Component without harness connected
(Fuel Lid Opener Switch)


Check the switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
5 (IG) - 2 (E) Pushed (ON) Below 1 Ω
5 (IG) - 2 (E) Not Pushed (OFF) 10 kΩ or higher


If the result is not as specified, replace the fuel lid opener switch.



b.

Check the switch illumination.

i.

Apply auxiliary battery voltage to the switch connector and check that the fuel lid opener switch illuminates.

OK:
Auxiliary Battery Condition Specified Condition
Auxiliary battery positive (+) → Terminal 6 (ILL+)
Auxiliary battery negative (-) → Terminal 1 (ILL-) 		Illumination illuminates


If the result is not as specified, replace the fuel lid opener switch.