Use the same procedure for the RH and LH sides.
The procedure below is for the LH side.
68960C
1.DISPOSE OF BACK DOOR STAY SET LH
Fully extend the back door stay set LH.
Secure the back door stay set LH horizontally in a vise with the piston rod pulled out.
Wearing protective glass, gradually cut the shaded part between "A" and "B" shown the illustration, using a metal saw to gradually release the gas.
| Area | Measurement |
|---|---|
| A - B | 140 mm (5.51 in.) |
| C - D | 80 mm (3.15 in.) |
| E - F | 150 mm (5.91 in.) |
Always use proper safety equipment and be careful when drilling because shards of metal way fly about.
The gas is colorless, odorless and non-poisonous.