Use the same procedure for the RH and LH sides.
The procedure below is for the LH side.
62332C
1.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
| *a | Paint Mark |
|
Cutout |
Align the paint mark on the rear door opening trim weatherstrip LH with the cutout on the flange indicated in the illustration to install it.
| Location | Color |
|---|---|
| LH Side | White |
| RH Side | Pink |
Always align the paint mark when installing the part. If the paint mark position is out of place, water leaks may occur.
After the installation, check that the corners are properly installed.
To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.