RM36D0EC _58 Vehicle Interior _083092 DOOR LOCK _0403681 REAR DOOR LOCK G

DOOR LOCK  REAR DOOR LOCK  INSPECTION  


PROCEDURE

Hide 69060A 1.INSPECT REAR DOOR LOCK WITH MOTOR ASSEMBLY LH

a.
B340417C26
0.958,3.604 1.26,3.604 true 2.167,3.615 2.469,3.615 true 2.031,3.875 2.188,4.219 2.188,4.219 2.323,4.219 true 1.135,4.24 1.271,4.24 1.271,4.24 1.417,3.875 true 2.042,2.146 2.354,2.302 0.313,0.156 10 false *a 1.656,2.271 1.969,2.427 0.313,0.156 10 false *b 0.833,2.917 1.146,3.073 0.313,0.156 10 false *c 2.542,3.552 2.854,3.75 0.313,0.198 10 false UL 0.833,3.521 1.146,3.719 0.313,0.198 10 false L 2.365,4.156 2.854,4.365 0.49,0.208 10 false LSSR 1.01,4.167 1.5,4.375 0.49,0.208 10 false E
*a Unlock
*b Lock
*c Component without harness connected
(Rear Door Lock with Motor Assembly LH)


Check the operation of the door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the door lock motor.

OK:
Auxiliary Battery Connection Result
Auxiliary battery positive (+) → Terminal 4 (L)
Auxiliary battery negative (-) → Terminal 1 (UL) 		Locks
Auxiliary battery positive (+) → Terminal 1 (UL)
Auxiliary battery negative (-) → Terminal 4 (L) 		Unlocks


If the result is not as specified, replace the rear door lock with motor assembly LH.



b.

Check the operation of the unlock detection switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
6 (LSSR) - 9 (E) Locked 10 kΩ or higher
6 (LSSR) - 9 (E) Unlocked Below 1 Ω


If the result is not as specified, replace the rear door lock with motor assembly LH.



Hide 69050A 2.INSPECT REAR DOOR LOCK WITH MOTOR ASSEMBLY RH

a.
B340416C27
0.927,3.615 1.26,3.615 true 2.177,3.625 2.51,3.625 true 2.031,3.875 2.208,4.302 2.208,4.302 2.344,4.302 true 1.115,4.302 1.25,4.302 1.25,4.302 1.427,3.875 true 1.042,2.083 1.354,2.24 0.313,0.156 10 false *a 1.604,2.313 1.917,2.469 0.313,0.156 10 false *b 0.854,2.906 1.167,3.063 0.313,0.156 10 false *c 0.99,4.25 1.146,4.448 0.156,0.198 10 false E 2.396,4.25 2.917,4.469 0.521,0.219 10 false LSSR 2.563,3.583 2.823,3.76 0.26,0.177 10 false UL 0.802,3.542 0.958,3.74 0.156,0.198 10 false L
*a Unlock
*b Lock
*c Component without harness connected
(Rear Door Lock with Motor Assembly RH)


Check the operation of the door lock motor.

i.

Apply auxiliary battery voltage and check the operation of the door lock motor.

OK:
Auxiliary Battery Connection Result
Auxiliary battery positive (+) → Terminal 4 (L)
Auxiliary battery negative (-) → Terminal 1 (UL) 		Locks
Auxiliary battery positive (+) → Terminal 1 (UL)
Auxiliary battery negative (-) → Terminal 4 (L) 		Unlocks


If the result is not as specified, replace the rear door lock with motor assembly RH.



b.

Check the operation of the unlock detection switch.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
6 (LSSR) - 9 (E) Locked 10 kΩ or higher
6 (LSSR) - 9 (E) Unlocked Below 1 Ω


If the result is not as specified, replace the rear door lock with motor assembly RH.