M20D-FKS FUEL  FUEL PRESSURE SENSOR(for High Pressure)  INSPECTION  

0.875,0.177 1.01,0.177 1.01,0.177 1.26,0.635 true 1.365,0.646 1.677,0.156 1.677,0.156 1.792,0.156 true 0.073,0.052 0.385,0.208 0.313,0.156 10 false *a 1.521,1.708 1.833,1.865 0.313,0.156 10 false *b 0.677,0.094 0.99,0.292 0.313,0.198 10 false E2 1.844,0.083 2.156,0.281 0.313,0.198 10 false VC

*a	Component without harness connected (Fuel Pressure Sensor)
*b	Voltage Applied between Terminals

Apply 5 V between terminals 1 (VC) and 2 (E2).

NOTICE:

·

Be careful when connecting the leads as the fuel pressure sensor may be damaged if the leads are connected to the wrong terminals.

·

Do not apply more than 6 V to terminals 1 (VC) or 2 (E2).

HINT:

If a stable power supply is not available, connect 4 nickel-metal hydride batteries (1.2 V each) or equivalent in series.

1.104,0.396 1.229,0.396 1.229,0.396 1.583,1.094 true 1.677,1.094 1.833,0.396 1.833,0.396 1.969,0.396 true 0.104,0.063 0.417,0.219 0.313,0.156 10 false *a 0.875,0.323 1.188,0.521 0.313,0.198 10 false PR 2.021,0.323 2.333,0.521 0.313,0.198 10 false E2

*a	Component without harness connected (Fuel Pressure Sensor)

Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection	Condition	Specified Condition
3 (PR) - 2 (E2)	Pressure not applied to fuel pressure sensor	Approximately 0.4 to 0.6 V*

*: The output voltage changes depending on the voltage applied to the terminals.

If the result is not as specified, replace the fuel pressure sensor.