This DTC will be stored if the operation of the roof sunshade is suspended and a pulse input of 10 Hz or more is detected when the motor relay is off.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B234A | Motor Control Relay Stuck ON (Fr Shade) | Position failure (When the roof sunshade ECU (sliding roof drive gear assembly [roof sunshade]) enters fail-safe mode due to a problem with the gear position) | Roof sunshade ECU (sliding roof drive gear assembly [roof sunshade]) |
When the roof sunshade ECU (sliding roof drive gear assembly [roof sunshade]) is removed and reinstalled or replaced, the roof sunshade ECU (sliding roof drive gear assembly [roof sunshade]) must be initialized.
DTC B234A is stored in the roof sunshade ECU (sliding roof drive gear assembly [roof sunshade]).
Clear the DTCs.
Check for DTCs.
DTC B234A is not output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG