This DTC will be stored if the operation of the sliding roof is suspended and a pulse input of 10 Hz or more is detected when the motor relay is off.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B2345 | Motor Control Relay Stuck ON | Position failure (When the sliding roof ECU (sliding roof drive gear assembly [sliding roof]) enters fail-safe mode due to a problem with the gear position) | Sliding roof ECU (sliding roof drive gear assembly [sliding roof]) |
If the sliding roof ECU (sliding roof drive gear assembly [sliding roof]) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly [sliding roof]) must be initialized.
DTC B2345 is stored in the sliding roof ECU (sliding roof drive gear assembly [sliding roof]).
Clear the DTCs.
Check for DTCs.
DTC B2345 is not output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG