RM36D0EC _51 Engine / Hybrid System _083058 M20D-FKS ENGINE CONTROL _0401816 CAMSHAFT OIL CONTROL SOLENOID A

M20D-FKS ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 15370 1.INSTALL CAM TIMING OIL CONTROL SOLENOID ASSEMBLY

HINT:

Perform this procedure only when replacement of the O-ring is necessary.


a.

Clean the O-ring groove of the cam timing oil control solenoid assembly.

NOTICE:

Make sure the O-ring groove is free of foreign matter.



b.

Install a new O-ring to the cam timing oil control solenoid assembly.

NOTICE:

Do not damage the O-ring when installing it.


HINT:

Perform this procedure only when replacement of the O-ring is necessary.



c.
A401879

Apply a light coat of engine oil to the O-ring of the cam timing oil control solenoid assembly.

NOTICE:

If reusing the cam timing oil control solenoid assembly, be sure to inspect the O-ring.



d.

Install the cam timing oil control solenoid assembly to the No. 2 timing chain cover assembly with 2 new bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the cam timing oil control solenoid assembly has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or moved out of place when installing the cam timing oil control solenoid assembly.




e.

Connect the cam timing oil control solenoid assembly connector.