CHECK FREEZE FRAME DATA
The ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Radar Cruise1*1 or Radar Cruise2*2 / Trouble Codes.
*1: Output from the ECM
*2: Output from the forward recognition camera
Select the DTCs (with snow icon) for which freeze frame data is recorded.
The operating conditions the moment a DTC is stored are recorded as freeze frame data. Furthermore, only the latest 3 DTCs can be stored by the forward recognition camera.
LIST OF FREEZE FRAME DATA
Radar Cruise1:
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Cruise Vehicle Speed | Vehicle speed for cruise control | 0 km/h (0 mph) to 255 km/h (158 mph) | During cruise control: Almost same as meter vehicle speed | - |
| Cruise Memory Vehicle Speed | Vehicle speed when cruise control is set | 0 km/h (0 mph) to 255 km/h (158 mph) | When cruise is set: Vehicle speed when cruise was set | - |
| Cruise Request Throttle Opening Angle | Cruise requested position | 0 to 124.99 deg | Changes depending on the conditions of the dynamic radar cruise control system | - |
| Cruise Target Acceleration | Target acceleration while in cruise control mode | -13.10 to 13.10 m/s2 | Current value displayed | - |
| Driving Support ECU Target Acceleration | - | - | - | Cannot be used |
| Cruise Request Driving Force | Cruise request torque signal | -10.00 to 9.92 kN | Changes depending on the conditions of the dynamic radar cruise control system | - |
| Cruise Request Driving Force Feedback Status | - | - | - | Cannot be used |
| Cruise Control Permission Condition | - | - | - | Cannot be used |
| Cruise Control Condition | - | - | - | Cannot be used |
| Cruise Main Switch Operation Condition | Cruise control main switch status | ON or OFF | ON: Cruise control main switch pushed
OFF: Cruise control main switch not pushed |
- |
| Accelerator Pedal | Condition of the accelerator pedal during cruising | ON or OFF | ON: Accelerator pedal depressed
OFF: Accelerator pedal released |
- |
| Cruise Brake Cancel Switch | Cruise cancel signal from the stop light switch assembly | ON or OFF | ON: Brake pedal depressed
OFF: Brake pedal released |
- |
| Stop Light Switch Main-CPU | Cruise cancel signal from the stop light switch assembly | ON or OFF | ON: Brake pedal depressed
OFF: Brake pedal released |
- |
| Stop Light Switch Sub-CPU | - | - | - | Cannot be used |
| Request Manual Cancel | - | - | - | Cannot be used |
| Request Automatic Cancel | - | - | - | Cannot be used |
| Cruise Brake Control Decision | Cruise brake control decision | ON or OFF | ON: Cruise brake activated
OFF: Cruise brake deactivated |
- |
| Cruise Brake Control Permission Condition | - | - | - | Cannot be used |
Radar Cruise2:
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Total Distance Traveled | - | - | - | Cannot be used |
| Total Distance Traveled - Unit | - | - | - | Cannot be used |
| Cruise Control Main Switch | Cruise control mode signal | Vehicle-to-vehicle Distance Control (All Speed), Vehicle-to-vehicle Distance Control (Hi Speed) or Constant Speed Control | Vehicle-to-vehicle Distance Control (All Speed): Vehicle-to-vehicle distance control mode (w/ Full-Speed Range Following Function)
Vehicle-to-vehicle Distance Control (Hi Speed): Vehicle-to-vehicle distance control mode (w/o Full-Speed Range Following Function) Constant Speed Control: Constant speed control mode |
- |
| Estimated Vehicle Acceleration | Estimated acceleration condition while driving the vehicle | -5.00 to 5.00 m/s2 | Current value displayed | - |
| Accelerator Pedal Idle | Condition of the accelerator pedal during cruising | ON or OFF | ON: Accelerator pedal released
OFF: Accelerator pedal depressed |
- |
| Forward Vehicle Distance | Distance to preceding vehicle | 0 to 255 m | Current value displayed | - |
| Forward Vehicle Relative Speed | Relative speed against preceding vehicle | -128 km/h (-80 mph) to 127 km/h (79 mph) | Current value displayed | - |
| Cruise Warning Request | Forward vehicle approach warning signal | ON or OFF | ON: Forward vehicle approaching
OFF: Forward vehicle not approaching |
- |
| Accelerator Over Ride | Accelerator pedal position signal during cruising | ON or OFF | ON: Accelerator over ride ON
OFF: Accelerator over ride OFF |
- |
| Front Radar Sensor High Temperature | Millimeter wave radar sensor assembly high temperature abnormality | Normal or High Temperature | Normal: Millimeter wave radar sensor assembly temperature is normal
High Temperature: Millimeter wave radar sensor assembly temperature is high |
·
"High Temperature" displayed when the millimeter wave radar sensor assembly is in the following condition -
When the ambient temperature of the millimeter wave radar sensor assembly is 70°C (158°F) or more, such as when the vehicle is left alone in an extremely hot environment ·
When "High Temperature" is displayed, and the dynamic radar cruise control system is in one of the following conditions -
X2027 in the vehicle control history (Front Radar Sensor Outside Guaranteed Operating Temperature) is stored -
"Radar Cruise Control Unavailable" is displayed on the multi-information display ·
If "High Temperature" is displayed, refer to X2027 in the front radar sensor system (for Mono Camera Type) vehicle control history |
| Front Radar Sensor Low Voltage | Millimeter wave radar sensor assembly low voltage abnormality | Normal or Low Voltage | Normal: Millimeter wave radar sensor assembly voltage is normal
Low Voltage: Millimeter wave radar sensor assembly voltage is low |
·
"Low Voltage" displayed when the millimeter wave radar sensor assembly is in the following condition -
When the input voltage is approximately 8 V or less, immediately after turning the ignition switch is started ·
When "Low Voltage" is displayed, and the dynamic radar cruise control system is in one of the following conditions -
X2028 in the vehicle control history (Front Radar Sensor Outside Guaranteed Operating Voltage) is stored -
"Radar Cruise Control Unavailable" is displayed on the multi-information display ·
If "Low Voltage" is displayed, refer to X2028 in the front radar sensor system vehicle control history |