EXTERIOR PANELS / TRIM SIDE MUDGUARD DISASSEMBLY
CAUTION / NOTICE / HINT
- HINT:
- ·
Use the same procedure for the RH and LH sides.
·The procedure listed below is for the LH side.
PROCEDURE
53852D
1.REMOVE FRONT WHEEL OPENING EXTENSION PAD LH
- HINT:
-
When removing the front wheel opening extension pad LH, if the double-sided tape is difficult to remove, heat the adhesive of the front wheel opening extension pad LH and side mudguard sub-assembly LH using a heat light.
| Item | Temperature |
|---|---|
| Side Mudguard Sub-assembly LH | 20 to 30°C (68 to 86°F) |
| Front Wheel Opening Extension Pad LH |
- CAUTION:
- ·
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b*a Heated Part *b Heat Light
Do not touch the heat light and heated parts.
·Touching the heat light may result in burns.
·Touching heated parts for a long time may result in burns.
- NOTICE:
-
Do not heat the side mudguard sub-assembly LH and front wheel opening extension pad LH excessively.
Remove the front wheel opening extension pad LH.
75895C
2.REMOVE NO. 3 MOULDING TAPE
- HINT:
-
When removing the No. 3 moulding tape, if the double-sided tape is difficult to remove, heat the adhesive of the No. 3 moulding tape and side mudguard sub-assembly LH using a heat light.
| Item | Temperature |
|---|---|
| Side Mudguard Sub-assembly LH | 20 to 30°C (68 to 86°F) |
| No. 3 Moulding Tape |
- CAUTION:
- ·
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part *b Heat Light
Do not touch the heat light and heated parts.
·Touching the heat light may result in burns.
·Touching heated parts for a long time may result in burns.
- NOTICE:
-
Do not heat the side mudguard sub-assembly LH and No. 3 moulding tape excessively.
|
Remove in this Direction |
Detach the double-sided tape.
Remove the No. 3 moulding tape.