RM3660EC _58 Vehicle Interior _080793 METER / GAUGE / DISPLAY _0473175 METER / GAUGE SYSTEM(for 12.3 Inch Display) W

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM(for 12.3 Inch Display)  CUSTOMIZE PARAMETERS  


CUSTOMIZE METER / GAUGE SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Warning or Display.


v.

Select the setting by referring to the table below.

Warning
Tester Display Description Default Setting ECU
Lane Change Flashing Times Adjust Function to change the lane change flashing times. 3 $00:OFF,$01:3,$02:4,$03:5,$04:6,$05:7 Combination meter assembly
Flasher Sound Volume Adjust Function to change the flasher sound volume Medium $02:Large,$00:Medium,$01:Small Combination meter assembly
50006 7
Display
Tester Display Description Default Setting ECU
ODO Display Time After IG OFF Adjust Function to change the ODO display time after the ignition switch is turned off 30s $00:30s,$01:60s,$02:600s,$03:OFF Combination meter assembly
ECO Drive Indicator Zone Display Function (Meter) Function to enable/disable the eco driving indicator ON $00:OFF,$01:ON Combination meter assembly
50006 14


b.

Customizing with the multi-information display

i.

Select the settings tab on the multi-information display.


ii.

Select the setting by referring to the table below.

NOTICE:
·

When the cable is disconnected from the negative (-) battery terminal, some of the settings will be reset. Therefore, it is necessary to make a note of each set value before disconnecting the cable.

·

As some values cannot be selected when the vehicle is being driven, perform the procedure with the vehicle stopped.



HINT:

Depending on the specifications of the vehicle, some items may not be displayed.


Adjust Meter Brightness
Display Description Setting ECU
- Brightness setting for meter - Combination meter assembly

LDA
Display Description Setting ECU
LDA Lane departure alert system setting ON/OFF Forward recognition camera
Low Speed Range Assist Low Speed Range Assist setting ON/OFF
Alert Options Lane departure alert method setting Vibration/Beep/OFF
Alert Timing Lane departure alert timing level setting 1/2

PCS
Display Description Setting ECU
- Pre-collision system setting ON/OFF Forward recognition camera
Warning timing Change Warning Timing 1/2/3
Warning buzzer Warning buzzer ON/OFF ON/OFF
PCS Pre-collision system setting ON/OFF

PDA
Display Description Setting ECU
- PDA system setting ON/OFF Forward recognition camera
Sensitivity Change Sensitivity 1/2/3
SA System ON/OFF ON/OFF
DA System ON/OFF ON/OFF
OAA System ON/OFF ON/OFF

Parking Assist
Display Description Setting ECU
- TOYOTA parking assist-sensor system setting ON/OFF Clearance warning ECU assembly
Volume Clearance warning buzzer volume setting 1/2/3
Surround notice Surround Notice ON/OFF ON/OFF

PKSB
Display Description Setting ECU
- Parking support brake system setting ON/OFF Clearance warning ECU assembly

RSA
Display Description Setting ECU
- Road sign assist system setting ON/OFF Forward recognition camera
Notification Method Above Speed Limit Excess speed notification method setting No Notification/Only Visual/Visual & Audio
Overtaking No overtaking notification method setting No Notification/Only Visual/Visual & Audio/Visual & Haptic
Others Others traffic sign notification method setting No Notification/Only Visual/Visual & Audio
Notification Level Excess speed notification level setting 10 km/h (5 MPH), 5 km/h (3 MPH), 2 km/h (1 MPH)

Vehicle Settings
Display Description Setting ECU
Driver Break Suggestion Driver Break Suggestion ON/OFF ON/OFF Combination meter assembly
DRCC/Speed Limiter DRCC(RSA) System ON/OFF ON/OFF ECM
Speed Limit Offset Speed Limit Offset +/- +/-1, +/-5, +/-10
Acceleration Setting Acceleration Setting Low/Mid/High 1/2/3
Speed Setting (Push) Speed Setting (Push) +/-1, +/-5, +/-10 +/-1, +/-5, +/-10
Speed setting (Hold) Speed Setting (Hold) +/-1, +/-5, +/-10 +/-1, +/-5, +/-10
Guide message System ON/OFF ON/OFF
Curve Speed Reduction Curve Speed Reduction System OFF/Low/Mid/High 1/2/3/OFF
TPWS Setting Tire Set Switching Register replaced valve / ID - Tire Pressure Warning ECU and Receiver
Tire Rotation Reset tire location -
Tire Pressure Setting Set tire warning pressure -
Pressure unit setting Change display units -
Oil Maintenance Maintenance required reminder data reset Yes/No ECM
Rear Seat Reminder Rear seat reminder function setting ON/OFF Main body ECU (Multiplex network body ECU)

Meter Settings
Display Description Setting ECU
Language Display language setting * Related ECUs
Units Display units setting *
Meter Style Meter style setting Casual/Smart/Tough/Sporty Combination meter assembly
Meter Type Meter type setting 2-dial/1-dial/OFF
Dial Type Change dial type Tachometer/Speedmeter/Hybrid System
Eco driving indicator light Eco driving indicator light display setting ON/OFF
EV driving indicator light EV driving indicator light display setting ON/OFF
Fuel Economy Displayed fuel economy display item setting Trip Average/Total Average
Hybrid System Eco Guidance Eco Guidance setting ON/OFF
Drive Info. Items Distance Displayed drive information display item setting Average Speed/Distance/Total Time
Total Time Displayed drive information display item setting Average Speed/Distance/Total Time
TRIP A Items Distance Current trip result display setting Average Speed/Distance/Total Time
Average Speed Current trip result display setting Average Speed/Distance/Total Time
TRIP B Items Distance Current trip result display setting Average Speed/Distance/Total Time
Average Speed Current trip result display setting Average Speed/Distance/Total Time
Pop-Up Display TbT Navigation Interrupt display setting ON/OFF
Telephone Interrupt display setting ON/OFF
Audio Operation Interrupt display setting ON/OFF
Volume Operation Interrupt display setting ON/OFF
Voice Control Interrupt display setting ON/OFF
Multi-Information Display OFF Multi-information display off setting -
Default Settings Reset the combination meter settings to the default setting Yes/No Related ECUs