RM3660EC _56 Audio / Visual / Telematics _080754 PARK ASSIST / MONITORING _0394058 ULTRASONIC SENSOR(for Rear Side) A

PARK ASSIST / MONITORING  ULTRASONIC SENSOR(for Rear Side)  INSTALLATION  


PROCEDURE

Hide 89305 1.INSTALL ULTRASONIC SENSOR CUSHION SET

HINT:

Only perform this procedure when removing and installing the ultrasonic sensor cushion set.


a.

Install the ultrasonic sensor cushion set as shown in the illustration.

B549652C11
0,0 0,0 false
V113147

Install in this Direction - -



Hide 89C48A 2.INSTALL REAR CORNER ULTRASONIC SENSOR RETAINER

HINT:
·

Perform this procedure only when replacement of the rear corner ultrasonic sensor retainer is necessary.

·

If a rear corner ultrasonic sensor retainer has been removed, replace it with a new one.

·

The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.



a.

Clean the surface of the rear bumper assembly.

i.

Remove any remaining double-sided tape from the rear bumper assembly.


ii.

Wipe off any adhesive residue with cleaner.



b.
E335575C01
1.719,1.125 1.938,1.292 0.219,0.167 10 true *a
*a 25 mm (0.984 in.)


Cover the sensor installation hole with a 25 mm (0.984 in.) circular piece of tape.


c.
E464111C01
0,0 0,0 false
V100144

Primer


Using a brush or felt, apply primer or equivalent to the rear corner ultrasonic sensor retainer installation area.

NOTICE:
·

Use a clean brush or felt.

·

Do not touch the rear bumper assembly until the primer has dried.




d.

Confirm that the primer has completely dried by touching the rear bumper assembly. Then remove the tape.


e.

Peel off the release paper from a new rear corner ultrasonic sensor retainer.


f.
E464112C01
1.74,1.875 1.74,1.635 false 1.646,1.875 1.844,2.073 0.198,0.198 10 true *a
*a Scribed Line
V100155

Press Here


Align the rear corner ultrasonic sensor retainer with the mark on the rear bumper assembly and install it as shown in the illustration.

NOTICE:
·

Ensure that the rear corner ultrasonic sensor retainer is within the scribed line.

·

The double-sided tape of a rear corner ultrasonic sensor retainer will deteriorate if it is detached. Make sure to replace the rear corner ultrasonic sensor retainer with a new one when reattachment is necessary.



HINT:

Press the area shown in the illustration with a force of 30 N (3.0 kgf) for 3 seconds to securely install the rear corner ultrasonic sensor retainer to the rear bumper assembly. Confirm there is no clearance between the rear corner ultrasonic sensor retainer and rear bumper assembly.



Hide 89C48B 3.INSTALL REAR CENTER ULTRASONIC SENSOR RETAINER

HINT:
·

Perform this procedure only when replacement of the rear center ultrasonic sensor retainer is necessary.

·

If a rear center ultrasonic sensor retainer has been removed, replace it with a new one. Install the rear center ultrasonic sensor with a new rear center ultrasonic sensor retainer as a set to the rear bumper assembly.

·

The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.



a.
E464105

Engage the 2 claws to install a new rear center ultrasonic sensor retainer to the rear center ultrasonic sensor.


b.

Clean the surface of the rear bumper assembly.

i.

Remove any remaining double-sided tape from the rear bumper assembly.


ii.

Wipe off any adhesive residue with cleaner.



c.
E335575C01
1.719,1.125 1.938,1.292 0.219,0.167 10 true *a
*a 19 mm (0.748 in.)


Cover the sensor installation hole with a 19 mm (0.748 in.) circular piece of tape.


d.
E464104C01
0,0 0,0 false
V100144

Primer


Using a brush or felt, apply primer or equivalent to the rear center ultrasonic sensor retainer installation area.

NOTICE:
·

Use a clean brush or felt.

·

Do not touch the rear bumper assembly until the primer has dried.




e.

Confirm that the primer has completely dried by touching the rear bumper assembly. Then remove the tape.


f.

Peel off the release paper from the rear center ultrasonic sensor retainer.


g.
E464106C01
1.729,1.906 1.729,1.688 false 1.646,1.906 1.854,2.115 0.208,0.208 10 true *a
*a Scribed Line
V100155

Press Here


Align the rear center ultrasonic sensor retainer with rear center ultrasonic sensor with the mark on the front bumper assembly and install it as shown in the illustration.

NOTICE:
·

Ensure that the sensor tip is correctly inserted into the sensor installation hole of the rear bumper assembly.

·

Ensure that the rear center ultrasonic sensor retainer is within the scribed line.

·

The double-sided tape of a rear center ultrasonic sensor retainer will deteriorate if it is detached. Make sure to replace the rear center ultrasonic sensor retainer with a new one when reattachment is necessary.



HINT:

Press the area shown in the illustration with a force of 30 N (3.0 kgf) for 3 seconds to securely install the rear center ultrasonic sensor retainer to the rear bumper assembly. Confirm there is no clearance between the rear center ultrasonic sensor retainer and rear bumper assembly.



Hide 89342 4.INSTALL REAR CORNER ULTRASONIC SENSOR

HINT:

The illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


a.
E464109C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 claws to install the rear corner ultrasonic sensor as shown in the illustration.


b.

Connect the connector.


Hide 89342A 5.INSTALL REAR CENTER ULTRASONIC SENSOR

HINT:

This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.


a.

When replacing only the rear center ultrasonic sensor:

i.
E464101C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 2 claws to install the rear center ultrasonic sensor as shown in the illustration.



b.
E464099C01
0,0 0,0 false
V113147

Install in this Direction


Engage the 4 claws as shown in the illustration.


c.

Connect the connector.