DATA LIST
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body, Entry&Start or Power Source Control* / Data List.
*: w/o Entry Function
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| ACC SW | Engine switch on (ACC) signal | OFF or ON | OFF: Engine switch off
ON: Engine switch on (ACC) |
- |
| IG SW | Engine switch on (IG) signal | OFF or ON | OFF: Engine switch off or on (ACC)
ON: Engine switch on (IG) |
- |
| RR Door Courtesy SW | Rear door courtesy light switch (for RH) signal | OFF or ON | OFF: Rear door RH closed
ON: Rear door RH open |
- |
| RL Door Courtesy SW | Rear door courtesy light switch (for LH) signal | OFF or ON | OFF: Rear door LH closed
ON: Rear door LH open |
- |
| FR Door Lock Pos | Front door RH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door RH locked
UNLOCK: Front door RH unlocked |
- |
| FR Door Courtesy SW | Front door courtesy light switch (for RH) signal | OFF or ON | OFF: Front door RH closed
ON: Front door RH open |
- |
| FL Door Lock Pos | Front door LH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door LH locked
UNLOCK: Front door LH unlocked |
- |
| FL Door Courtesy SW | Front door courtesy light switch (for LH) signal | OFF or ON | OFF: Front door LH closed
ON: Front door LH open |
- |
| RR-Door Lock Pos SW | Rear door RH unlock detection switch signal | OFF or ON | OFF: Rear door RH locked
ON: Rear door RH unlocked |
*1 |
| RL-Door Lock Pos SW | Rear door LH unlock detection switch signal | OFF or ON | OFF: Rear door LH locked
ON: Rear door LH unlocked |
*2 |
| Luggage Courtesy SW | Luggage compartment door courtesy light switch signal | OFF or ON | OFF: Luggage compartment door courtesy light switch off
ON: Luggage compartment door courtesy light switch on |
- |
| Wireless Control | Wireless door lock control function | OFF or ON | Customize setting displayed | - |
| Hazard Answer Back | Hazard light answer-back of wireless function | OFF or ON | Customize setting displayed | - |
| Unlock 2 Operation | 2 press wireless unlock function | OFF or ON | Customize setting displayed | - |
| Auto Lock Time | Automatic lock time | 30 s, 60 s or 120 s | Customize setting displayed | - |
| Trunk Lid Operation | Opening of luggage compartment door using electrical key transmitter sub-assembly | 1 tim ON, 2 tim ON, Long1, Long2 or Prohibit | Customize setting displayed | - |
*1: When checking RR-Door Lock Pos SW, make sure to check it with the rear door LH locked.
*2: When checking RL-Door Lock Pos SW, make sure to check it with the rear door RH locked.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| # Codes | Number of DTCs | 0 to 255 | Number of stored DTCs | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Power Supply Condition | Power supply state* | All OFF, ACC ON, IG ON or ST ON | All OFF: Engine switch off (ACC and IG)
ACC ON: Engine switch on (ACC) IG ON: Engine switch on (IG) ST ON: Sending engine start request signal |
- |
*: w/o Entry Function
ACTIVE TEST
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Door Lock | Door lock motor | OFF/Unlock/Lock | - |
| D-Door Unlock | Driver door lock motor | OFF/ON | - |