SELF-DIAGNOSTIC MODE (USING GTS)
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Utility / Wireless Door Lock Diagnosis Mode.
| Tester Display |
|---|
| Wireless Door Lock Diagnosis Mode |
Proceed to the next step in accordance with the prompts on the GTS screen.
Check that the system has switched to self-diagnostic mode by checking the interior light output pattern.
Inspect the diagnostic outputs when the door control transmitter assembly switch is pressed. The diagnostic outputs can be checked by the interior light flash pattern.
| Interior Light Output | Suspected Area |
|---|---|
| A | Normal (No malfunction) |
| B | Register wireless code |
| C | Wave interference or malfunction of a related component |