CUSTOMIZE LTA
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the Multi-information Display
Turn the ignition switch to ON.
Enter the following menus: Settings Tab / Settings / LTA Setup
Select the setting by referring to the table below.
Using the steering pad switches, change the customize settings.
| Display | Description | Setting | Default |
|---|---|---|---|
| Lane Center | Lane centering function setting | On/Off | On |
| Steering Assist | Steering assist function setting | On/Off | On |
| Sensitivity | Lane departure alert timing | High/Standard | High |
| Sway Warning | Vehicle sway warning function setting | On/Off | On |
| Sway Sensitivity | Sway warning sensitivity setting | High/Standard/Low | Standard |
Some LTA functions are operable only when other functions are enabled or operating. Refer to the following table.
| Vehicle-to-vehicle Distance Control | LTA Main Switch | Steering Assist | Lane Center | Sway Warning | |
|---|---|---|---|---|---|
|
●: System/function operating ○: Turned/Set to On |
|||||
| Lane Departure Alert Function | - | ○ | - | - | - |
| Steering Assist Function | - | ○ | ○ | - | - |
| Lane Centering Function | ● | ○ | ○ | ○ | - |
| Vehicle Sway Warning Function | - | - | - | - | ○ |