DESCRIPTION
Whenever a front radar sensor system DTC is stored, the millimeter wave radar sensor assembly stores the current vehicle state as Freeze Frame Data.
CHECK FREEZE FRAME DATA
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Front Radar Sensor / Trouble Codes.
According to the display on the GTS, select a DTC with freeze frame data.
Read the freeze frame data recorded when the DTC was stored.
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| Total Distance Traveled | - | - | - | Cannot be used |
| Total Distance Traveled - Unit | - | - | - | Cannot be used |
| Vehicle Setting Value Delta X | Sensor position | Min.: -1.28 m, Max.: 1.27 m | Actual sensor position displayed | - |
| Vehicle Setting Value Delta Z | Sensor position | Min.: 0.00 m, Max.: 655.35 m | Actual sensor position displayed | - |
| Vehicle Setting Value H | Sensor position | Min.: 0.00 m, Max.: 2.55 m | Actual sensor position displayed | - |
| Optical Axis Not Adjusted Status | Beam axis not adjusted status | Not Complete or Complete | Not Complete: Beam axis adjustment not completed
Complete: Beam axis adjustment completed |
- |
| Optical Axis Adjustment Angle (Horizontal) (Latest) | Latest beam axis adjustment angle value (horizontal) | Min.: -12.8 deg, Max.: 12.7 deg | Adjusted angle of beam axis alignment (Default value: 0.0 deg.) | - |
| Optical Axis Adjustment Angle (Vertical) (Latest) | Latest beam axis adjustment angle value (vertical) | Min.: -12.8 deg, Max.: 12.7 deg | Adjusted angle of beam axis alignment (Default value: 0.0 deg.) | - |
| Optical Axis Adjustment Angle (Horizontal) (2nd Latest) | 2nd latest beam axis adjustment angle value (horizontal) | Min.: -12.8 deg, Max.: 12.7 deg | Adjusted angle of beam axis alignment (Default value: 0.0 deg.) | - |
| Optical Axis Adjustment Angle (Vertical) (2nd Latest) | 2nd latest beam axis adjustment angle value (vertical) | Min.: -12.8 deg, Max.: 12.7 deg | Adjusted angle of beam axis alignment (Default value: 0.0 deg.) | - |
| Optical Axis Offset Angle (Horizontal) | Beam axis offset value (horizontal) | Min.: -12.8 deg, Max.: 12.7 deg | Beam axis offset value | - |
| Optical Axis Offset Angle (Vertical) | Beam axis offset value (vertical) | Min.: -12.8 deg, Max.: 12.7 deg | Beam axis offset value | - |
| Optical Axis Offset Angle (Horizontal) (with On-Line Calibration Angle) | Beam axis offset value (horizontal) (after completing calibration) | Min.: -12.8 deg, Max.: 12.7 deg | Beam axis offset value | - |
| Optical Axis Offset Angle (Vertical) (with On-Line Calibration Angle) | Beam axis offset value (vertical) (after completing calibration) | Min.: -12.8 deg, Max.: 12.7 deg | Beam axis offset value | - |
| Dirt Detection for Radar Cruise | Dirt detection status for radar cruise | OFF or ON | OFF: Dirt not detected
ON: Dirt detected |
- |
| Dirt Detection for PCS | Dirt detection status for PCS | OFF or ON | OFF: Dirt not detected
ON: Dirt detected |
- |
| Partially Dirt Detection | Partial dirt detection status | OFF or ON | OFF: Dirt not detected
ON: Dirt detected |
- |
| Data Flash Malfunction | Data flash malfunction status | OFF or ON | OFF: Normal
ON: Malfunction detected |
- |
| Power Supply Circuit Malfunction | Power supply circuit malfunction status | OFF or ON | OFF: Normal
ON: Malfunction detected |
- |
| Millimeter-wave Circuit Malfunction | Millimeter-wave radar sensor circuit malfunction status | OFF or ON | OFF: Normal
ON: Malfunction detected |
- |
| eDMA Transfer Completed Interrupt Malfunction | - | - | - | Cannot be used |
| Acceleration Sensor Malfunction | Acceleration sensor malfunction status | OFF or ON | OFF: Normal
ON: Malfunction detected |
- |
| IG Voltage Protection | IG voltage protection status | OFF or ON | OFF: Normal
ON: Malfunction detected |
- |
| Optical Axis Misalignment (Vertical - Acceleration Sensor Method) | Beam axis misalignment (vertical) result | OFF or ON | OFF: Normal
ON: Misalignment |
- |
| Optical Axis Misalignment (Horizontal) | Beam axis misalignment (horizontal) result | OFF or ON | OFF: Normal
ON: Misalignment |
- |
| Optical Axis Misalignment (Vertical - Acceleration Sensor Method and Recognition Method) | Beam axis misalignment (vertical) result | OFF or ON | OFF: Normal
ON: Misalignment |
- |
| Communication Error Between Front Radar Sensor and System Control ECU | Communication error status between front radar sensor and system control ECU | OFF or ON | OFF: Normal
ON: Malfunction |
- |
| Millimeter-wave Circuit Temperature Protection | Millimeter-wave circuit temperature protection status | OFF or ON | OFF: Normal
ON: Malfunction |
- |
| Destination Malfunction | Destination malfunction status | OFF or ON | OFF: Normal
ON: Malfunction |
- |
| IG Voltage | IG voltage value | Min.: 0.0 V, Max.: 25.5 V | 10.5 to 16.0 V: Ignition switch ON | - |
| Front Radar Sensor Temperature | Temperature of area around millimeter wave radar sensor assembly | Min.: -32768 °C, Max.: 32767 °C | Actual temperature of area around millimeter wave radar sensor displayed | This value differs to the outside temperature. |
| Vehicle Speed | Vehicle speed | Min.: -30.00 km/h (-19 mph), Max.: 225.99 km/h (159 mph) | Almost same as actual vehicle speed | - |
| On-Line Calibration Angle (Horizontal) | Calibrated angle value (horizontal) | Min.: -12.8 deg, Max.: 12.7 deg | Learned value | - |
| On-Line Calibration Angle (Vertical) | Calibrated angle value (vertical) | Min.: -12.8 deg, Max.: 12.7 deg | Learned value | - |