PRECAUTIONS FOR DISCONNECTING CABLE FROM NEGATIVE (-) AUXILIARY BATTERY TERMINAL
After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
PRECAUTION FOR REPLACING PART
If any of the following procedures are performed, the settings of the My Settings System will be cleared as shown in the following table.
| Part Replaced or Procedure Performed | Cleared Settings | ||
|---|---|---|---|
| Electrical key transmitter sub-assembly | Bluetooth device*1 | Digital key*2 | |
| Replace the main body ECU (multiplex network body ECU) | ● | ● | ● |
| Replace the certification ECU (smart key ECU assembly) | ● | - | ● |
| Replace the radio and display receiver assembly | - | ● | - |
| Replace the digital key ECU assembly | - | - | ● |
| Erase the electrical key transmitter sub-assembly | ● | - | - |
| Erase the digital key | - | - | ● |
*1: for vehicles which display the assigned settings of Bluetooth devices on the multi-display
*2: for vehicles which display the assigned settings of face identification on the multi-display
After replacing the radio and display receiver assembly, the radio and display receiver assembly may not reflect the driver settings even if the My Settings system identifies the user.
| Item | Description |
|---|---|
| Conditions | The radio and display receiver assembly is replaced when the electrical key transmitter sub-assembly is set as the My Settings device. |
| Symptoms | ·
Although an electrical key transmitter sub-assembly is set as a My Settings device, the name of the driver is blank. ·
Even though the user is identified, the multimedia settings are not recalled. |
| Action | By performing the following, driver information / multimedia settings can be reflected to the vehicle.
·
On the screen of the multi-display, select "Settings" → "Current driver" → "Profile lock by password" to ON. (The default setting is ON.) ·
Switch from driver to guest. ·
Switch to the original driver again. ·
Enter the password.
|
| Item | Description |
|---|---|
| Conditions | The radio and display receiver assembly is replaced when the electrical key transmitter sub-assembly is set as the My Settings device. |
| Symptoms | Although an electrical key transmitter sub-assembly is set as a My Settings device, the name of the driver is blank. |
| Action | Method of action before replacing the radio and display receiver assembly
1.
1. On the screen of the multi-display, select "Settings" → "Info & Security" → "System reset" and perform an initialization. Method of action after replacing the radio and display receiver assembly 1.
On the screen of the multi-display, register Driver 1 / Driver 2 / Driver 3. 2.
On the screen of the multi-display, select "Settings" → "Info & Security" → "System reset" and perform an initialization.
|
PRECAUTION FOR REGISTRATION
Before replacing the main body ECU (multiplex network body ECU), refer to Service Bulletin.