SEAT  REAR SEAT REMINDER SYSTEM  HOW TO PROCEED WITH TROUBLESHOOTING  

Interview the customer to confirm the problem.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING201906,999999,_V1,_080724,_0393250,RM100000001HWSQ,

Measure the auxiliary battery voltage with the ignition switch off.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

Check the fuses and relays.

Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

Using the GTS, check for CAN communication system DTCs.

for HV Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>DIAGNOSIS SYSTEM202304,202307,_57,_080743,_0392424,RM100000002B9SB,202307,999999,_57,_080743,_0392424,RM100000002CP2C,

for Gasoline Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model (except NR Series))>DIAGNOSIS SYSTEM202304,999999,_57,_080743,_0598531,RM100000002BFVC,

Result:

Result	Proceed to
CAN DTCs are not output	A
CAN DTCs are output	B

Refer to Problem Symptoms Table.

Click hereVehicle Interior>SEAT>REAR SEAT REMINDER SYSTEM>PROBLEM SYMPTOMS TABLE202304,999999,_58,_080732,_0600560,RM100000002BD2F,

Result:

Result	Proceed to
Fault is not listed in Problem Symptoms Table	A
Fault is listed in Problem Symptoms Table	B

Operation Check

Click hereVehicle Interior>SEAT>REAR SEAT REMINDER SYSTEM>OPERATION CHECK202304,999999,_58,_080732,_0600560,RM100000002BD2C,

Inspection