☰ Toyota Levin Turbo☰ فهرستPower Source / Network › NR Series BATTERY / CHARGING › BATTERY CURRENT SENSOR
RM3660EC
_57
Power Source / Network
_080760
NR Series BATTERY / CHARGING
_0393834
BATTERY CURRENT SENSOR
A
NR Series BATTERY / CHARGING BATTERY CURRENT SENSOR INSTALLATION
PROCEDURE
28850C
1.INSTALL BATTERY STATE SENSOR ASSEMBLY
a.
Engage the 2 claws to install the battery state sensor assembly to the battery current sensor holder.
b.
Engage the wire harness clamp.
c.
Connect the battery state sensor assembly connector.
d.
Install the battery state sensor assembly to the battery and tighten the nut.
- Torque:
- 5.4 N*m (55 kgf*cm, 48 in.*lbf)
e.
Connect the engine wire and earth wire to the battery state sensor assembly with the nut.
- Torque:
- 7.6 N*m (77 kgf*cm, 67 in.*lbf)
2. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
- HINT:
-
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.