RM3660EC _56 Audio / Visual / Telematics _080751 AUDIO / VIDEO _0599626 AUDIO AND VISUAL SYSTEM(for 10.25 Inch Display) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for 10.25 Inch Display)  When Voice Recognition Switch is Pressed a Short Beep is Emitted but the Voice Recognition System does not Start  


PROCEDURE

1.CHECK CONDITION
a.

While paying attention to the condition of the spoken voice command, perform a voice recognition operation.

HINT:
·

If an unnecessary word (such as "um" or "ah") is spoken before or after the recognition word, the system incorrectly recognizes the recognition word.

·

The system cannot recognize voice commands when multiple people are speaking simultaneously.

·

If the speaking speed is too fast or too slow, the recognition rate may decrease.

·

The system may have difficulty recognizing voice commands depending on the voice quality (such as a hoarse voice due to poor physical condition).



OK:

Voice command is recognized normally.



Result:
Proceed to
OK
NG



OK

END (VOICE RECOGNITION MAY BE DIFFICULT DUE TO SPEECH CONDITION)

NG