FRONT WIPER CONTROL FUNCTION
| Control/Function | Description |
|---|---|
| INT function*1 | Operates the wipers intermittently at LO speed when the front wiper switch is in the INT position. |
| MIST function | Operates the front wipers in LO when the front wiper switch is held in the MIST position. |
| Intermediate position return function | Resumes wiper operation according to the operation of the front wiper switch or washer switch when the wipers are stopped in any position other than the lower reverse position. |
| Vehicle speed sensing type adjustable intermittent wiper control*2 | Controls the delay of the front wipers when the front wiper switch is in the INT position.
|
| Vehicle speed linked wiper operation control*2 | Operates the wipers as follows when the vehicle is stopped.
·
When the vehicle speed is 5 km/h or lower and the intermittent time adjustment switch is in any position other than P4, if the front wiper switch is moved to the LO position, the wipers will operate in LO for 3 cycles and then at a 2.5 second interval. ·
When the intermittent time adjustment switch is in any position other than P4 and the front wiper switch is in the LO position, if the vehicle speed decreases to 5 km/h or lower, the wipers will operate in LO for 2 cycles and then at a 2.5 second interval.
|
| Protection mode | Suspends wiper operation if the wipers are prevented from operating for 10 seconds or more, in order to protect the wiper and washer system. |
*1: w/o Intermittent Time Adjustment Switch
*2: w/ Intermittent Time Adjustment Switch
WASHER CONTROL FUNCTION
| Control/Function | Description |
|---|---|
| Front washer cooperation | ·
When the washer switch is held in the Fr WASH position for 0.5 seconds or more, the front wipers operate in LO. ·
When the washer switch is released, the front wipers operate in LO for 3 additional cycles.
|
| Drip prevention wiper function | Approximately 3 seconds after front washer cooperation completes, operates the wipers for 1 cycle to remove any remaining washer fluid.
|