RM3660EC _58 Vehicle Interior _080793 METER / GAUGE / DISPLAY _0598151 METER / GAUGE SYSTEM(except 12.3 Inch Display) W

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM(except 12.3 Inch Display)  CUSTOMIZE PARAMETERS  


CUSTOMIZE METER / GAUGE SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the GTS

i.

Select the setting by referring to the table below.

HINT:

Depending on the specifications of the vehicle, some items may not be displayed.


Warning
Tester Display Description Default Setting ECU
Lane Change Flashing Times Adjust Function to change the lane change flashing times. 3 $00:OFF,$01:3,$02:4,$03:5,$04:6,$05:7 Combination meter assembly
Flasher Sound Volume Adjust Function to change the turn signal flasher buzzer sound volume Medium $02:Large,$00:Medium,$01:Small Combination meter assembly
50006 7
Display
Tester Display Description Default Setting ECU
ODO Display Time After IG OFF Adjust Function to change the trip result display time after the ignition switch is turned off 30s $00:30s,$01:60s,$02:600s,$03:OFF Combination meter assembly
ECO Drive Indicator Zone Display Function (Meter) Function to enable/disable the eco driving indicator ON $00:OFF,$01:ON Combination meter assembly
50006 14


b.

Customizing with the multi-information display

i.

Select the settings tab on the multi-information display.


ii.

Select the setting by referring to the table below.

NOTICE:
·

When the cable is disconnected from the negative (-) auxiliary battery terminal, some of the settings will be reset. Therefore, it is necessary to make a note of each set value before disconnecting the cable.

·

As some values cannot be selected when the vehicle is being driven, perform the procedure with the vehicle stopped.



HINT:

Depending on the specifications of the vehicle, some items may not be displayed.


except NR Series Engine

Adjust Meter Brightness
Display Description Setting ECU
- Brightness setting for meter - Combination meter assembly

Lane Departure Alert System
Display Description Setting ECU
- Lane departure alert system setting ON/OFF Forward recognition camera
Low Speed Range Assist Low Speed Range Assist setting ON/OFF
Alert Options Lane departure alert method setting Vibration/Beep/OFF
Alert Timing Lane departure alert timing level setting 1/2

PCS
Display Description Setting ECU
Warning timing Change Warning Timing 1/2/3 Forward recognition camera
Warning buzzer Warning buzzer ON/OFF ON/OFF
PCS Pre-collision system setting ON/OFF

PDA
Display Description Setting ECU
- PDA function setting ON/OFF Forward recognition camera
Sensitivity PDA buzzer volume setting 1/2/3
SA System ON/OFF ON/OFF
DA System ON/OFF ON/OFF
OAA System ON/OFF ON/OFF

Parking Assist
Display Description Setting ECU
- Parking support brake system setting ON/OFF Clearance warning ECU assembly
Parking Assist System Volume Clearance warning buzzer volume setting 1/2/3
Surround notice Surround Notice ON/OFF ON/OFF

PKSB
Display Description Setting ECU
- Parking support brake system setting ON/OFF Clearance warning ECU assembly

RSA
Display Description Setting ECU
- Road sign assist system setting ON/OFF Forward recognition camera
Notification Method Above Speed Limit Excess speed notification method setting No Notification/Only Visual/Visual & Audio
Overtaking No overtaking notification method setting No Notification/Only Visual/Visual & Audio/Visual & Haptic
Others Others traffic sign notification method setting No Notification/Only Visual/Visual & Audio
Notification Level Excess speed notification level setting 10 km/h (5 MPH), 5 km/h (3 MPH), 2 km/h (1 MPH)

Vehicle Settings
Display Description Setting ECU
Driver Break Suggestion Driver Break Suggestion ON/OFF ON/OFF Combination meter assembly
DRCC(RSA) DRCC(RSA) System ON/OFF ON/OFF ECM
Speed Limit Offset Speed Limit Offset +/- +/-1, +/-5, +/-10
Extended Resume Time System ON/OFF ON/OFF
Overtake Prevention System ON/OFF ON/OFF
Acceleration Acceleration Setting Low/Mid/High 1/2/3
Speed Setting (Push) Speed Setting (Push) +/-1, +/-5, +/-10 +/-1, +/-5, +/-10
Speed setting (Hold) Speed Setting (Hold) +/-1, +/-5, +/-10 +/-1, +/-5, +/-10
Guide message System ON/OFF ON/OFF
Curve Speed Reduction Curve Speed Reduction System OFF/Low/Mid/High 1/2/3/OFF
TPWS Setting Tyre Set Switching Register replaced valve / ID - Tire Pressure Warning ECU and Receiver
Tyre Rotation Reset tire location -
Tyre Pressure Setting Set tire warning pressure -
Pressure unit setting Change display units -
Rear Seat Reminder Rear seat reminder function setting ON/OFF Main body ECU (Multiplex network body ECU)

Meter Settings
Display Description Setting ECU
Language Display language setting * Related ECUs
Units Display units setting *
Meter Style Change Dial Type Casual/Smart/Sporty Combination meter assembly
Analog Meter Change Dial Type Tacho Meter/Speed Meter/HV Meter
Eco driving indicator light Eco driving indicator light display setting ON/OFF
EV driving indicator light EV driving indicator light display setting ON/OFF
ECO tab Fuel Economy Displayed fuel economy display item setting Trip Average/Total Average/Tank Average
Audio tab Audio tab display setting ON/OFF
Vehicle information tab Display Contents Displayed drive information display item setting ON/OFF
Drive Info. Items Displayed drive information display item setting Average Speed/Distance/Total Time
Pop-Up Display TbT Navigation Interrupt display setting ON/OFF
Telephone Interrupt display setting ON/OFF
Audio Operation Interrupt display setting ON/OFF
Volume Operation Interrupt display setting ON/OFF
Voice Control Interrupt display setting ON/OFF
MID OFF Multi-information display off setting -
Default Settings Reset the combination meter settings to the default setting Yes/No Related ECUs

*: Varies according to the vehicle specification.


for NR Series Engine

Clock Setting
Display Description Setting ECU
Detail Settings 12H/24H setting and clock adjustment - Combination meter assembly

LTA
Display Description Setting ECU
Lane Center Lane tracing assist function setting ON/OFF Forward recognition camera
Steering Assist Steering control function setting ON/OFF
Sensitivity Lane departure alert timing setting 1/2
Sway Warning Vehicle sway warning function setting ON/OFF
Sway Sensitivity Sway warning sensitivity setting 1/2/3

PCS
Display Description Setting ECU
- Pre-collision system setting ON/OFF Forward recognition camera
Sensitivity Pre-collision system sensitivity setting 1/2/3

Vehicle Settings
Display Description Setting ECU
Oil Maintenance Oil maintenance value reset Yes/No Combination meter assembly
TPWS Tire inflation pressure display function setting Set Pressure/Change Wheel Tire Pressure Warning ECU and Receiver
Stop and Start System Stop and start system operation time Normal Standard/Long Extended Engine stop and start ECU

Meter Settings
Display Description Setting ECU
Language Display language setting * Related ECUs
Units Display units setting *
Meter Type Multi-information display layout setting Analog/Digital Combination meter assembly
Eco driving indicator light Eco driving indicator light display setting ON/OFF
Audio tab Audio tab display setting ON/OFF
Vehicle information tab Drive Info. Type Displayed drive information display item setting Trip/Total
Drive Info. Items Displayed drive information display item setting -
Trip Summary Current trip result display setting Drive Info/Eco Score
Pop-Up Display TbT Navigation Interrupt display setting ON/OFF
Telephone Interrupt display setting ON/OFF
Audio Operation Interrupt display setting ON/OFF
Volume Operation Interrupt display setting ON/OFF
Voice Control Interrupt display setting ON/OFF
Duration Interrupt display setting for stop and start system operation time ON/OFF
Status Interrupt display setting for stop and start system notification status ON/OFF
Calendar Date setting -
MID OFF Multi-information display off setting -
Default Settings Reset the combination meter settings to the default setting Yes/No Related ECUs

*: Varies according to the vehicle specification