RM3660EC _53 Suspension _080787 REAR SUSPENSION _0596193 REAR SHOCK ABSORBER(for Torsion Beam Type Suspension) A

REAR SUSPENSION REAR SHOCK ABSORBER(for Torsion Beam Type Suspension) REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear shock absorber assembly removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure	Necessary Procedure	Effect/Inoperative Function when Necessary Procedure not Performed	Link
*: The vehicle height changes because of tire replacement.
Rear wheel alignment adjustment	· Perform "Reset Memory" · Perform "Calibration"	· VSC is disabled or malfunctions · DTCs are output · Slip indicator light illuminates · ABS warning light illuminates	(202304,999999,_54,_080770,_0599811,RM100000002B9XU,)
· Tires · Suspension parts	Rear television camera assembly optical axis (Back camera position setting)*	Parking Assist Monitor System	(202304,999999,_56,_080754,_0596561,RM100000002AX0C,)

PROCEDURE

Hide Display 1.REMOVE REAR WHEEL

Click hereGeneral>MAINTENANCE>TIRE AND WHEEL>REMOVAL202304,202307,_V1,_080956,_0392691,RM100000002B9S6,202307,999999,_V1,_080956,_0392691,RM100000002CWK9,

Hide Display 48540 2.REMOVE REAR SHOCK ABSORBER ASSEMBLY

1.281,1.656 1.708,1.656 false 1.49,2.052 1.917,2.052 false 1.115,1.573 1.427,1.729 0.313,0.156 10 false *a 1.323,1.969 1.635,2.125 0.313,0.156 10 false *b

*a	Wooden Block
*b	Jack

Support the spring seat of the rear axle beam assembly using a jack and wooden block.

CAUTION:: Do not jack up the rear axle beam assembly too high as the vehicle may fall.

NOTICE:: ·

When jacking up the rear axle beam assembly, be sure to jack it up slowly.

·

Make sure to perform this operation with the vehicle kept as low as possible.

·

Keep supporting the rear axle beam assembly with a jack until the installation of the rear shock absorber assembly is completed.

Remove the bolt and separate the rear shock absorber assembly while compressing the rear shock absorber assembly.

Remove the 2 bolts and rear shock absorber assembly from the vehicle.

Hide Display 48530B 3.REMOVE REAR NO. 1 SHOCK ABSORBER CUSHION WASHER

1.625,0.979 1.938,1.135 0.313,0.156 10 false *a 2.823,1.365 3.135,1.521 0.313,0.156 10 false *b

*a	Turn
*b	Hold

Secure the rear shock absorber assembly in a vise using aluminum plates.

NOTICE:: Do not overtighten the vise.

Using a 6 mm hexagon socket wrench, hold the rear shock absorber rod and remove the rear support to rear shock absorber nut.

Remove the rear No. 1 shock absorber cushion washer from the rear shock absorber assembly.

Hide Display 48755 4.REMOVE REAR SUSPENSION SUPPORT

Remove the rear suspension support from the rear shock absorber assembly.

Hide Display 48760B 5.REMOVE REAR SUSPENSION SUPPORT ASSEMBLY

Remove the rear suspension support assembly from the rear shock absorber assembly.

Hide Display 48752A 6.REMOVE REAR SUSPENSION SUPPORT STOPPER

Remove the rear suspension support stopper from the rear shock absorber assembly.

Hide Display 48341B 7.REMOVE REAR NO. 1 SPRING BUMPER

Remove the rear No. 1 spring bumper from the rear shock absorber assembly.