RM3660EC _52 Drivetrain _080786 AXLE AND DIFFERENTIAL _0596192 REAR AXLE HUB(for Torsion Beam Type Suspension) A

AXLE AND DIFFERENTIAL  REAR AXLE HUB(for Torsion Beam Type Suspension)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 42450B 1.INSTALL REAR AXLE HUB AND BEARING ASSEMBLY

a.

Install the rear axle hub and bearing assembly, rear disc brake dust cover sub-assembly and rear caliper support bracket to the rear axle beam assembly with the 4 bolts.

Torque:
90 N*m (918 kgf*cm, 66 ft.*lbf)


Hide 890C0A 6.CONNECT NO. 2 PARKING BRAKE WIRE ASSEMBLY

a.

Connect the No. 2 parking brake wire assembly connector to the parking brake actuator assembly.


b.

Connect the No. 2 parking brake wire assembly connector to the rear axle hub and bearing assembly.