RM3660EC
_58
Vehicle Interior
_080793
METER / GAUGE / DISPLAY
_0473831
TRIP SWITCH
G
METER / GAUGE / DISPLAY TRIP SWITCH INSPECTION
PROCEDURE
84975
1.INSPECT TRIP SWITCH (for TFTM Made)
a.
1.302,3.073 1.448,2.656
true
2.146,3.083 1.979,2.646
true
1.188,3.073 1.542,3.271
0.354,0.198
10
false
A/B
2.115,3.094 2.344,3.292
0.229,0.198
10
false
E
0.667,1.917 1.042,2.156
0.375,0.24
10
false
*a
| *a | Component without harness connected
(Trip Switch) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 5 (A/B) - 2 (E) ODO/TRIP switch pressed Below 1 Ω ODO/TRIP switch not pressed 10 kΩ or higher
If the result is not as specified, replace the trip switch.
b.
Illumination Inspection
i.
1.198,3.01 1.281,2.656
true
2.156,2.656 2.24,2.99
true
1.094,3.01 1.427,3.208
0.333,0.198
10
false
ILL+
2.167,3 2.781,3.198
0.615,0.198
10
false
ILL-
0.656,1.875 0.969,2.073
0.313,0.198
10
false
*a
| *a | Component without harness connected
(Trip Switch) |
Apply auxiliary battery voltage to the trip switch and check that it illuminates.
- OK:
Condition Specified Condition Auxiliary battery positive (+) → Terminal 6 (ILL+)
Auxiliary battery negative (-) → Terminal 1 (ILL-)Illuminates
If the result is not as specified, replace the trip switch.
84975
2.INSPECT TRIP SWITCH (for GTMC Made)
a.
1.292,3 1.438,2.583
false
2.104,3.021 1.938,2.583
false
1.156,3.021 1.51,3.219
0.354,0.198
10
false
A/B
2.104,3.021 2.26,3.219
0.156,0.198
10
false
E
0.667,1.917 1.042,2.156
0.375,0.24
10
false
*a
| *a | Component without harness connected
(Trip Switch) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 5 (A/B) - 2 (E) ODO/TRIP switch pressed Below 1 Ω ODO/TRIP switch not pressed 10 kΩ or higher
If the result is not as specified, replace the trip switch.
b.
Illumination Inspection
i.
1.198,2.917 1.281,2.583
false
2.104,2.583 2.188,2.917
false
1.115,2.958 1.448,3.156
0.333,0.198
10
false
ILL+
2.135,2.948 2.75,3.146
0.615,0.198
10
false
ILL-
0.656,1.875 0.969,2.073
0.313,0.198
10
false
*a
| *a | Component without harness connected
(Trip Switch) |
Apply auxiliary battery voltage to the trip switch and check that it illuminates.
- OK:
Condition Specified Condition Auxiliary battery positive (+) → Terminal 6 (ILL+)
Auxiliary battery negative (-) → Terminal 1 (ILL-)Illuminates
If the result is not as specified, replace the trip switch.