ACOUSTIC VEHICLE ALERTING SYSTEM  VEHICLE APPROACHING SPEAKER ECU  REMOVAL  

55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

55434F 2.REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

55405B 3.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (except 10.25 Inch Display)

55405B 4.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 10.25 Inch Display)

55900 5.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Electrical Control Type)

6.REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Mechanical Control Type)

7.REMOVE CENTER INSTRUMENT PANEL SAFETY PAD RETAINER WITH HEATER CONTROL (for Mechanical Control Type)

67913 8.REMOVE FRONT DOOR SCUFF PLATE RH

62111C 9.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

62311B 10.DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH

55318F 11.REMOVE NO. 2 INSTRUMENT SIDE PANEL

55670A 12.REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY (for GTMC Made)

55470 13.REMOVE INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

55670A 14.REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY (for TFTM Made)

55607 15.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

55550 16.REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

55433B 17.REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

82877 18.REMOVE ECU INTEGRATION BOX RH

86572 19.REMOVE VEHICLE APPROACHING SPEAKER CONTROLLER

a.

0,0 0,0 false

Remove in this Direction

Disengage the 2 claws to remove the vehicle approaching speaker controller as shown in the illustration.

NOTICE:

·

If the ECU integration box RH is deformed or damaged, replace it.

·

Do not bend the 2 claws more than necessary.