PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
PRECAUTION WHEN USING GTS
After all DTCs are cleared, check if the malfunction occurs again 6 seconds after turning the ignition switch ON.
PRECAUTIONS FOR THE DOOR CONTROL TRANSMITTER ASSEMBLY
The door control transmitter assembly is a precision instrument. Be sure to observe the following:
Do not drop or strike the door control transmitter assembly.
Do not allow the door control transmitter assembly to be kept in a high temperature place for a long time.
Do not use an ultrasonic washing machine to clean the door control transmitter assembly.
Keep the door control transmitter assembly away from magnets or magnetized items during use.
Do not attach any stickers to the door control transmitter assembly.
PRECAUTION FOR REGISTRATION
If replacing any of the following parts, refer to Service Bulletin.
Any door control transmitter assemblies or ECUs for which registration has been performed cannot be reused.
Door control transmitter assembly
Transponder key ECU assembly
ECM