☰ Toyota Levin Turbo☰ فهرستVehicle Exterior › ACOUSTIC VEHICLE ALERTING SYSTEM › ACOUSTIC VEHICLE ALERTING SYSTEM
RM3660EC
_59
Vehicle Exterior
_139017
ACOUSTIC VEHICLE ALERTING SYSTEM
_0582455
ACOUSTIC VEHICLE ALERTING SYSTEM
U
ACOUSTIC VEHICLE ALERTING SYSTEM ACOUSTIC VEHICLE ALERTING SYSTEM TERMINALS OF ECU
CHECK VEHICLE APPROACHING SPEAKER CONTROLLER
2.063,0.75 2.458,1.01
0.396,0.26
2.135,0.813 2.594,1.01
0.458,0.198
10
false
I204
a.
Disconnect the I204 vehicle approaching speaker controller connector.
b.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| I204-7 (+B) - Body ground | Power source | Ignition switch off | 11 to 14 V |
| I204-12 (GND) - Body ground | Ground | Always | Below 1 Ω |
c.
Connect the I204 vehicle approaching speaker controller connector.
d.
Check the signal waveform and check for pulses according to the condition(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| I204-3 (SP+) - I204-4 (SP-) | Vehicle approaching speaker assembly output | Vehicle approaching speaker assembly operating | A waveform synchronized with the sound is output.
(See Waveform) |
| I204-1 (CANH) - I204-12 (GND) | CAN communication line | Ignition switch ON | Pulse generation |
| I204-2 (CANL) - I204-12 (GND) | CAN communication line | Ignition switch ON | Pulse generation |
i.
Waveform
| Item | Condition |
|---|---|
| Tester Connection | I204-3 (SP+) - I204-4 (SP-) |
| Tool Setting | 1 V/DIV., 500 ms./DIV. |
| Condition | Vehicle approaching speaker assembly operating |