SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SWITCH ASSEMBLY  INSPECTION  

0.417,1.75 1.25,1.75 true 2.271,1.75 3,1.75 true 0.24,1.656 0.552,1.813 0.313,0.156 10 false *a 3.042,1.646 3.354,1.802 0.313,0.156 10 false *b 0.406,2.979 0.719,3.135 0.313,0.156 10 false *c

*a	Sliding Roof Switch
*b	Tilt Switch
*c	Component without harness connected (sliding roof switch (map light sub-assembly))

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
16 - 11	UP switch pressed	Below 100 Ω
16 - 11	UP switch not pressed	1 kΩ or higher
15 - 11	DOWN switch pressed	Below 100 Ω
15 - 11	DOWN switch not pressed	1 kΩ or higher
14 - 11	OPEN switch pressed	Below 100 Ω
14 - 11	OPEN switch not pressed	1 kΩ or higher
13 - 11	CLOSE switch pressed	Below 100 Ω
13 - 11	CLOSE switch not pressed	1 kΩ or higher

If the result is not as specified, replace the sliding roof switch (map light sub-assembly).

0.26,1.604 1.094,1.604 true 2.344,1.625 3.073,1.625 true 0.094,1.521 0.406,1.677 0.313,0.156 10 false *a 3.115,1.552 3.354,1.792 0.24,0.24 10 false *b 0.406,3.021 0.719,3.177 0.313,0.156 10 false *c

*a	Tilt Switch
*b	Sliding Roof Switch
*c	Component without harness connected (sliding roof switch (map light assembly))

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
15 - 14	UP switch pressed	Below 100 Ω
15 - 14	UP switch not pressed	1 kΩ or higher
16 - 14	DOWN switch pressed	Below 100 Ω
16 - 14	DOWN switch not pressed	1 kΩ or higher
5 - 14	OPEN switch pressed	Below 100 Ω
5 - 14	OPEN switch not pressed	1 kΩ or higher
17 - 14	CLOSE switch pressed	Below 100 Ω
17 - 14	CLOSE switch not pressed	1 kΩ or higher

If the result is not as specified, replace the sliding roof switch (map light assembly).