RM3660EC _58 Vehicle Interior _080733 HEATING / AIR CONDITIONING _0393727 REFRIGERANT LINE(for Gasoline Model) A

HEATING / AIR CONDITIONING  REFRIGERANT LINE(for Gasoline Model)  REMOVAL  


PROCEDURE

Hide 2.REMOVE PIPING CLAMP (for Suction Hose Sub-assembly Side)

a.

While pressing the end of the suction hose sub-assembly into the end of the suction pipe sub-assembly, use pliers to squeeze together both sides of the piping clamp until it breaks apart.

E418750C01
0.917,2.125 0.917,1.677 false 2.24,2.135 2.24,1.719 false 4.292,1.5 3.781,1.823 3.781,1.823 3.948,1.5 true 2.177,2.146 2.469,2.406 0.292,0.26 10 false *1 0.833,2.135 1.198,2.427 0.365,0.292 10 false *2 3.604,1.76 3.854,2.031 0.25,0.271 10 false *3 1.385,0.49 1.688,0.74 0.302,0.25 10 false *a
*1 Suction Pipe Sub-assembly *2 Suction Hose Sub-assembly
*3 Piping Clamp - -
*a Press In - -


NOTICE:
·

If any foreign matter is attached to the connected parts, brush it off or use compressed air to remove it before disconnecting the parts.

·

Make sure that fragments of the piping clamp do not enter the piping.




b.

Separate the suction hose sub-assembly.

NOTICE:

Remove any foreign matter from the connecting parts of the suction hose sub-assembly and suction pipe sub-assembly.



c.

Remove the 2 O-rings from the suction hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts with vinyl tape to prevent entry of moisture and foreign matter.



d.

Remove the piping clamp.