REAR SUSPENSION  REAR STABILIZER BAR  INSTALLATION  

0.135,1.51 0.135,1.104 true 0.063,1.542 0.24,1.771 0.177,0.229 10 true *a 0.75,0.625 0.917,0.792 0.167,0.167 10 true A 2.594,0.688 2.76,0.854 0.167,0.167 10 true C 2.615,1.677 2.781,1.844 0.167,0.167 10 true D 0.771,1.646 0.938,1.813 0.167,0.167 10 true B

*a	Identification Mark

Install the rear stabilizer bar sub-assembly to the rear suspension member sub-assembly with the 4 bolts.

Torque:

78 N*m (795 kgf*cm, 58 ft.*lbf)

NOTICE:

·

Ensure that the identification mark faces the right side of the vehicle.

·

Temporarily tighten the bolts in the order of (A), (B), (D) and then fully tighten the 4 bolts in the order of (C), (D), (A) and (B).

1.792,1.521 1.948,1.719 0.156,0.198 10 true A 0.969,4.135 1.125,4.333 0.156,0.198 10 true B

Install the rear stabilizer link assembly LH with the nut (A).

Torque:

75 N*m (765 kgf*cm, 55 ft.*lbf)

HINT:

If the ball joint turns together with the nut, use a 6 mm hexagon socket wrench to hold the stud bolt.

0.708,1.583 0.865,1.781 0.156,0.198 10 true A 2.063,0.104 2.219,0.302 0.156,0.198 10 true B

Install the rear floor side member cover LH with the clip (B).

Install the rear floor side member cover RH with the clip.

1.073,1.99 1.26,2.167 0.188,0.177 10 true A 2.302,0.198 2.49,0.375 0.188,0.177 10 true B

Install the rear floor side member cover LH with the clip (B).

Install the rear floor side member cover RH with the clip.