RM3660EC _59 Vehicle Exterior _080745 WINDOW / GLASS _0392468 POWER WINDOW REGULATOR MOTOR(for Front Door) G

WINDOW / GLASS POWER WINDOW REGULATOR MOTOR(for Front Door) INSPECTION

PROCEDURE

Hide Display 85720D 1.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

1.396,1.74 2.104,1.74 true 3.083,1.448 3.396,1.646 0.313,0.198 10 false *c 0.354,2.646 0.667,2.844 0.313,0.198 10 false *a 1.24,1.646 1.594,2.01 0.354,0.365 10 false *d 2.708,2.333 3.021,2.531 0.313,0.198 10 false *b

*a	Component without harness connected (Power Window Regulator Motor Assembly LH)
*b	Clockwise
*c	Counterclockwise
*d	Motor gear

Connect a positive (+) lead from the auxiliary battery to connector terminal 2.

NOTICE:: Do not connect a positive (+) lead from the auxiliary battery to any terminal other than terminal 2 to avoid damaging the pulse sensor inside the motor.

Connect a negative (-) lead from the auxiliary battery to connector terminals 1 and 7 or 10.

Check that the motor gear rotates smoothly as follows:

OK:

Measurement Condition	Specified Condition
1. Connect a positive (+) lead from the auxiliary battery to terminal 2, connect a negative (-) lead from the auxiliary battery to terminal 1, and keep them connected for 3 seconds or more. 2. With terminals 2 and 1 connected, connect a negative (-) lead from the auxiliary battery to terminal 10.	Motor gear rotates clockwise
1. Connect a positive (+) lead from the auxiliary battery to terminal 2, connect a negative (-) lead from the auxiliary battery to terminal 1, and keep them connected for 3 seconds or more. 2. With terminals 2 and 1 connected, connect a negative (-) lead from the auxiliary battery to terminal 7.	Motor gear rotates counterclockwise

If the result is not as specified, replace the power window regulator motor assembly (for driver door).

CAUTION:: Initialize the power window control system after installing the front door window regulator assembly.

Hide Display 85710E 2.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

1.531,1.625 2.49,1.625 true 2.521,1.51 2.833,1.708 0.313,0.198 10 false *d 0.375,2.656 0.688,2.854 0.313,0.198 10 false *a 0.365,1.49 0.823,1.688 0.458,0.198 10 false *b 0.948,2.302 1.365,2.615 0.417,0.313 10 false *c

*a	Component without harness connected (Power Window Regulator Motor Assembly RH)
*b	Clockwise
*c	Counterclockwise
*d	Motor gear

Connect a positive (+) lead from the auxiliary battery to connector terminal 2.

NOTICE:: Do not connect a positive (+) lead from the auxiliary battery to any terminal other than terminal 2 to avoid damaging the pulse sensor inside the motor.

Connect a negative (-) lead from the auxiliary battery to connector terminals 1 and 7 or 10.

Check that the motor gear rotates smoothly as follows:

OK:

Measurement Condition	Specified Condition
1. Connect the positive (+) lead from the auxiliary battery to terminal 2, connect a negative (-) lead from the auxiliary battery to terminal 1, and keep them connected for 3 seconds or more. 2. With terminals 2 and 1 connected, connect a negative (-) lead from the auxiliary battery to terminal 10.	Motor gear rotates counterclockwise
1. Connect a positive (+) lead from the auxiliary battery to terminal 2, connect a negative (-) lead from the auxiliary battery to terminal 1, and keep them connected for 3 seconds or more. 2. With terminals 2 and 1 connected, connect a negative (-) lead from the auxiliary battery to terminal 7.	Motor gear rotates clockwise

If the result is not as specified, replace the power window regulator motor assembly (for front passenger door).

CAUTION:: Initialize the power window control system after installing the front door window regulator assembly.