NR Series ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR  INSTALLATION  

Apply a light coat of engine coolant to the O-ring of the engine coolant temperature sensor.

Install the engine coolant temperature sensor to the water outlet with the clip.

NOTICE:

·

If the engine coolant temperature sensor has been struck or dropped, replace it.

·

If reusing the engine coolant temperature sensor, be sure to inspect the O-ring.

·

Make sure that the O-ring is not cracked or moved out of place when installing the engine coolant temperature sensor.

Connect the engine coolant temperature sensor connector.

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>NR Series (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION201906,999999,_51,_080777,_0393969,RM100000001I1RE,