RM3660EC
_51
Engine / Hybrid System
_080777
NR Series ENGINE CONTROL
_0392339
MASS AIR FLOW METER
A
NR Series ENGINE CONTROL MASS AIR FLOW METER INSTALLATION
PROCEDURE
22204
1.INSTALL MASS AIR FLOW METER SUB-ASSEMBLY
- HINT:
-
Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.
a.
Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.
- NOTICE:
- ·
If the mass air flow meter sub-assembly has been struck or dropped, replace it.
·If reusing the mass air flow meter sub-assembly, be sure to inspect the gasket.
·Make sure that the gasket is not cracked or moved out of place when installing the mass air flow meter sub-assembly.
b.
Engage the clamp and connect the mass air flow meter sub-assembly connector.
2.PERFORM INITIALIZATION
a.
Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.