RM3660EC _51 Engine / Hybrid System _080777 NR Series ENGINE CONTROL _0392335 CAMSHAFT OIL CONTROL SOLENOID G

NR Series ENGINE CONTROL  CAMSHAFT OIL CONTROL SOLENOID  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 15370 1.INSPECT CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY

a.

Connect the GTS to the DLC3.


b.

Start the engine.


c.

Turn the GTS on.


d.

Inspect the camshaft timing oil control solenoid assembly (for intake side).

i.

Enter the following menus: Powertrain / Engine / Active Test / Control the Intake VVT OCV Duty Ratio Bank 1 / Data List / Intake VVT Change Angle Bank 1.

Powertrain > Engine > Active Test
Active Test Display
Control the Intake VVT OCV Duty Ratio Bank 1
Data List Display
Intake VVT Change Angle Bank 1
50004 372 4 397

ii.

Read the Data List while performing the Active Test with the engine idling.

OK:
GTS Operation Data List (Intake VVT Change Angle Bank 1)
-100% to 100% Varies by 70 DegFR or more


If the result is not as specified, check the camshaft timing oil control solenoid assembly, wire harness and ECM.



e.

Inspect the camshaft timing oil control solenoid assembly (for Exhaust side).

i.

Enter the following menus: Powertrain / Engine / Active Test / Control the Exhaust VVT OCV Duty Ratio Bank 1 / Data List / Exhaust VVT Change Angle Bank 1.

Powertrain > Engine > Active Test
Active Test Display
Control the Exhaust VVT OCV Duty Ratio Bank 1
Data List Display
Exhaust VVT Change Angle Bank 1
50004 372 5 398

ii.

Read the Data List while performing the Active Test with the engine idling.

OK:
GTS Operation Data List (Exhaust VVT Change Angle Bank 1)
-100% to 100% Varies by 40 DegFR or more


If the result is not as specified, check the camshaft timing oil control solenoid assembly, wire harness and ECM.