RM3660EC _52 Drivetrain _080728 K313 CVT _0392269 OIL COOLER A

K313 CVT  OIL COOLER  INSTALLATION  


PROCEDURE

Hide 33493C 1.INSTALL TRANSMISSION OIL COOLER

a.

Apply Toyota Genuine CVT fluid FE to 2 new O-rings, and install them to the transmission oil cooler.


b.

Install the transmission oil cooler to the continuously variable transaxle assembly with the 3 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)

NOTICE:

Be careful not to damage the O-rings.



c.

Connect the No. 3 water by-pass hose and No. 4 water by-pass hose to the transmission oil cooler and slide the 2 clips to secure them.

NOTICE:

Fully insert the No. 3 water by-pass hose and No. 4 water by-pass hose to the 2nd rib on each oil cooler pipe.



Hide 5.INSPECT FOR OIL LEAK