RM3660EC
_V1
General
_080738
SPECIFICATIONS
_0391438
NR Series INTAKE / EXHAUST
F
SPECIFICATIONS NR Series INTAKE / EXHAUST SERVICE DATA
COOLANT
| Standard Capacity
|
Classification
|
| 1.9 liters (2.0 US qts, 1.7 Imp. qts)
|
Use only "TOYOTA Super Long Life Coolant", or similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, non-borate coolant with long-life hybrid organic acid technology (coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids).
|
TURBOCHARGER
| Boost pressure
|
Standard
|
120 kPa (1.2 kgf/cm2, 17 psi) or higher
|
| Turbine with valve housing sub-assembly
|
Warpage
|
Standard
|
0.15 mm (0.00591 in.) or less
|
| Waste gate valve
|
Clearance
|
Standard
|
0.15 mm (0.00591 in.) or less
|
| Turbine shaft
|
Axial play
|
Standard
|
0.15 mm (0.00591 in.) or less
|
| Waste gate valve actuator
|
Travel
|
Standard
|
15 mm (0.591 in.) or more
|
| Intake air control valve (air by-pass valve assembly)
|
Tester Connection
|
1 - 2
|
| Condition
|
20°C (68°F)
|
| Specified Condition
|
8.7 to 9.2 Ω
|
EXHAUST PIPE
| Compression spring
|
Exhaust manifold converter sub-assembly (TWC: Front Catalyst) x Front exhaust pipe sub-assembly (TWC: Rear Catalyst)
|
Minimum free length
|
41.5 mm (1.63 in.)
|
| Front exhaust pipe sub-assembly (TWC: Rear Catalyst) x Tail exhaust pipe assembly
|
Minimum free length
|
38.5 mm (1.52 in.)
|
RESERVE TANK CAP (for Intercooler)
| Item
|
Specified Condition
|
| Standard pressure (for brand-new reserve tank cap (for Intercooler))
|
93 to 123 kPa (0.9 to 1.3 kgf/cm2, 13.5 to 18 psi)
|
| Minimum pressure (for used reserve tank cap (for Intercooler))
|
79 kPa (0.8 kgf/cm2, 11.5 psi)
|